Wheel series

Wheels for a wide range of applications

From light duty casters through to wheels for transport units and heavy duty applications, this overview provides information about all of the wheel series available in Blickle’s standard range. Check here for information about the materials used in the tread and wheel center, how these affect the wheel and the different versions which are available.

  • 01 Wheels for light-duty and transport equipment casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    TPA
    VPA
    POES
    ALES
    PATH
    POA
    VPP-125
    VE
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    TPA
    50–200 mm
    50–250 kg
    high-quality thermoplastic rubber-elastomer (TPE), color gray
    to material description

    high-quality polypropylene, impact resistant, color silver gray (“-ELS” version color black)

    chemically bonded
    85 Shore A
    good
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing (C)
    • electrically conductive, non-marking, gray (-ELS)
    • thread guard with ball bearing seal (-KFD)
    • stainless steel roller bearing (-XR)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    • oil containing, staining possible
    Go to series TPA
    VPA
    50–150 mm
    40–130 kg
    high-quality solid rubber, color gray
    to material description
    high-quality nylon 6 or polypropylene in the version “-EL”, impact resistant, color black
    pressed-on tire
    80 Shore A
    very good
    good
    suffi cient
    20 °C to +60 °C
    plain bore, ball bearing
    • electrically conductive, black tire, marking (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    Go to series VPA
    POES
    80–200 mm
    110–350 kg
    high-quality elastic solid rubber “Blickle SoftMotion”, color gray
    to material description
    high-quality nylon 6, impact resistant, color black
    vulcanised tire
    55 Shore A
    excellent
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing (C), ball bearing (CC)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • stainless steel ball bearing and thread guard (-XKA / -XKF)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    Go to series POES
    ALES
    150–250 mm
    280–440 kg
    high-quality elastic solid rubber “Blickle SoftMotion”, color gray
    to material description
    die-cast aluminum, color silver gray
    vulcanised tire
    55 Shore A
    excellent
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +60 °C
    Go to series ALES
    PATH
    50–200 mm
    75–500 kg
    high-quality thermoplastic polyurethane (TPU), color dark gray
    to material description
    high-quality nylon 6, impact resistant, color silver gray
    chemically bonded
    94 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C)
    • electrically conductive, non-marking, gray (-ELS)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    Go to series PATH
    POA
    35–150 mm
    75–280 kg
    high-quality nylon 6, impact resistant, color black
    to material description
    high-quality nylon 6, impact resistant, color black
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, ball bearing (C)
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series POA
    VPP
    80–400 mm
    50–350 kg
    standard solid rubber, color black
    to material description
    high-quality polypropylene, impact resistant, color black
    pressed-on tire
    80 Shore A
    very good
    satisfactory
    sufficient
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing
    • non-marking, gray tire (-SG)
    • stainless steel roller bearing (-XR)
    • STARLOCK® cap made from stainless steel (ST-KA...)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    Go to series VPP
    VE
    80–200 mm
    50–205 kg
    standard solid rubber, color black
    to material description
    pressed steel, zinc-plated, blue-passivated, Cr6-free
    tire pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -25 °C to +80 °C
    roller bearing
    • non-marking, gray tire (-SG)
    • electrically conductive (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    Go to series VE
  • 02 Wheels for transport equipment and heavy-duty casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    V
    VWPP
    VW
    RD
    POEV-200
    ALEV
    SE
    GEV
    DS
    PK
    P
    PS-430
    VLE
    POTH
    POTHS
    ALTH
    SETH
    VSTH
    GTH
    ALST
    GST
    ALB
    VSB
    GB
    POBS
    ALBS
    GVU
    PPN
    PP
    POW
    PO
    SPO
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    V
    80–400 mm
    50–800 kg
    standard solid rubber, color black
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tire pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -20 °C to +80 °C
    plain bore, roller bearing, ball bearing
    • non-marking, gray tire (-SG)
    • electrically conductive (-EL)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design (-EL)
    • award-winning design (“Die gute Industrieform”)
    Go to series V
    VWPP
    125–260 mm
    50–200 kg
    soft rubber “Blickle Soft”, round profile, color black, wheel Ø 260 mm with additional hard rubber core
    to material description
    high-quality polypropylene, impact resistant, color black
    pressed-on tire
    50 Shore A
    excellent
    good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing
    • non-marking, gray tyre (-SG)
    • stainless steel roller bearing (-XR)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +30 °C
    Go to series VWPP
    VW
    125–260 mm
    50–200 kg
    soft rubber “Blickle Soft”, round profile, color black, wheel Ø 260 mm with additional hard rubber core
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tire pressed with rim
    50 Shore A
    excellent
    good
    satisfactory
    -20 °C to +80 °C
    roller bearing, ball bearing
    • non-marking, gray tire (-SG)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design
    • award-winning design (“Die gute Industrieform”)
    Go to series VW
    RD
    100–280 mm
    100–650 kg
    two-component solid rubber “Blickle Comfort”, hard rubber core and highly elastic tread, color black
    to material description
    pressed steel, strong rim structure with tubular steel hub, bolted or pressed, zinc-plated, blue-passivated, Cr6-free
    tire pressed with rim
    65 Shore A
    very good
    good
    satisfactory
    -20 °C to +80 °C
    roller bearing, ball bearing
    • non-marking, gray tire, 56 Shore A (-VLI)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • centrally-pressed rim: special impact and shock-resistant design
    • award-winning design (“Die gute Industrieform”)
    Go to series RD
    POEV
    60–300 mm
    120–650 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, color black
    to material description
    high-quality nylon 6, impact resistant, color black
    vulcanised tire
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    plain bore, roller bearing, ball bearing (C), ball bearing (CC), ball bearing
    • non-marking, gray tire (-SG)
    • non-marking, blue tire (-SB)
    • electrically conductive (-EL)
    • stainless steel roller bearing (-XR)
    • thread guard with ball bearing seal (-KAD / -KFD)
    • stainless steel ball bearing and thread guard (-XKA / -XKF)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • electrically conductive version (-EL) with increased rolling resistance
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    Go to series POEV
    ALEV
    100–250 mm
    200–650 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, color black
    to material description
    die-cast aluminum, color silver gray
    vulcanised tire
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, gray tire (-SG)
    • antistatic, non-marking, gray tire (-SG-AS)
    • electrically conductive (-EL)
    • the load capacity reduces at ambient temperatures above +60 °C
    • electrically conductive version (-EL) with increased rolling resistance
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series ALEV
    SE
    80–415 mm
    200–1,150 kg
    high-quality elastic solid rubber “Blickle EasyRoll” in smooth rolling quality, color black
    to material description
    thick-walled pressed steel, with tubular steel hub, triple welded, lacquered, color anthracite (version -SG: lacquered, silver color) wheel Ø 80–125 mm made from high-quality nylon 6, impact resistant, color black
    vulcanised or steel-wire reinforced tire, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, gray tire (-SG)
    • grease nipple (-NI)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel center particularly resistant to dirt, impact and shocks
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series SE
    GEV
    250–620 mm
    870–4,540 kg
    high-quality elastic solid rubber in smooth rolling quality, color black
    to material description
    rugged gray cast iron, with grease nipple, lacquered, color anthracite
    steel-wire reinforced tire, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, natural color tire (-SN)
    • hub cap for use as end wheel (-E)
    • drive wheel with hub keyway (see series GEVN)
    • hub fitting wheel (see series GEVA) (see series GEVA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel center is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GEV
    DS
    300–500 mm
    1,800–4,580 kg
    high-quality elastic solid rubber in smooth rolling quality, color black
    to material description
    very strong welded steel construction, with tubular steel hub, with grease nipple, lacquered, color anthracite
    steel-wire reinforced tire, pressed-on
    65 Shore A
    very good
    very good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • hub cap for use as end wheel (-E)
    • drive wheel with hub keyway (see series DSN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel center is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series DS
    PK
    200–400 mm
    75–250 kg
    pneumatic tire, ribbed or zig-zag profile, 2-ply rating, color black
    to material description
    high-quality polypropylene, impact resistant, color black
    tire mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    plain bore, roller bearing, ball bearing
    • rim color red (-ROT)
    • puncture-proof soft rubber wheel (see series VWPP)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheel width and diameter can change during operation
    Go to series PK
    P
    180–415 mm
    50–525 kg
    pneumatic tire, ribbed or zig-zag profile, 2 or 4 ply rating, color black
    to material description
    pressed steel, bolted (flat base rim) or triple welded drop base rim, zinc-plated, blue-passivated, Cr6-free or lacquered, color silver
    tire mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    plain bore, roller bearing, ball bearing
    • non-marking, gray tire (-SG)
    • puncture-proof foam-filled tire (-AG), slightly reduced compression and operational comfort
    • hub cap for use as end wheel (-E)
    • puncture-proof soft rubber wheel (see series VW)
    • hub fitting wheel (see series PA)
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    Go to series P
    PS
    300–536 mm
    450–1,300 kg
    pneumatic tire, zig-zag profile, 6, 8 or 10 ply rating, color black
    to material description
    heavy pressed steel, bolted (flat base rim), with welded tubular steel hub, zinc-plated, blue-passivated, Cr6-free
    tire mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -20 °C to +50 °C
    ball bearing
    • hub cap for use as end wheel (-E)
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    Go to series PS
    VLE
    250–525 mm
    450–1,885 kg
    super-elastic solid rubber, 2-component or 3-component tires, tough rubber core, highly elastic, abrasion- resistant tread, color black
    to material description
    heavy pressed steel, bolted, with welded tubular steel hub or reinforced rim version, zinc-plated, blue-passivated, Cr6-free
    steel-wire reinforced tire, mounted on rim
    70 Shore A
    very good
    good
    good
    -20 °C to +80 °C temporarily up to +100 °C
    ball bearing
    • non-marking, gray tire (-SG)
    • antistatic, black tire (-AS)
    • hub cap for use as end wheel (-E)
    • hub fitting wheel (see series VLEA) (see series VLEA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel width and diameter can change during operation
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • puncture-proof and maintenance- free
    Go to series VLE
    POTH
    75–250 mm
    200–1,000 kg
    high-quality thermoplastic polyurethane (TPU), color dark gray
    to material description
    high-quality nylon 6, impact resistant, color natural white
    chemically bonded
    94 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • thread guard with ball bearing seal (-KAD)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    Go to series POTH
    POTHS
    100–200 mm
    200–550 kg
    high-quality thermoplastic polyurethane (TPU), color blue
    to material description
    high-quality nylon 6, impact resistant, color natural white
    chemically bonded
    80 Shore A
    very good
    very good
    good
    -20 °C to +70 °C temporarily up to +90 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    Go to series POTHS
    ALTH
    80–250 mm
    200–1,250 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    die-cast aluminum, color silver gray
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • extremely crowned tread (-CO)
    • antistatic, non-marking, gray (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series ALTH
    SETH
    125–250 mm
    500–1,350 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    thick-walled pressed steel, triple welded, with tubular steel hub, lacquered, color silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • grease nipple (-NI)
    • the load capacity reduces at ambient temperatures above +40 °C
    • wheel center particularly resistant to dirt, impact and shocks
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series SETH
    VSTH
    35–125 mm
    100–540 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    Go to series VSTH
    GTH
    100–1,000 mm
    450–30,000 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    rugged gray cast iron, with grease nipple from wheel Ø 150 mm, lacquered, color silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing, spherical roller bearing
    • antistatic, non-marking, gray (-AS)
    • drive wheel with hub keyway (see series GTHN)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series GTH
    ALST
    80–300 mm
    200–1,150 kg
    high-quality polyurethane elastomer Blickle Softhane®, color green
    to material description
    die-cast aluminum, color silver gray
    cast tread
    75 Shore A
    very good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • extremely crowned tread (-CO)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series ALST
    GST
    125–400 mm
    450–3,000 kg
    high-quality polyurethane elastomer Blickle Softhane®, color green
    to material description
    rugged grey cast iron, with grease nipple from wheel Ø 160 mm, lacquered, color silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, grey (-AS)
    • drive wheel with hub keyway (see series GSTN)
    • hub fitting wheel (see series GSTA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series GST
    ALB
    100–250 mm
    400–1,250 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    die-cast aluminum, color silver gray
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series ALB
    VSB
    80 mm
    500 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • the load capacity reduces at ambient temperatures above +40 °C
    Go to series VSB
    GB
    100–1,000 mm
    450–30,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    rugged gray cast iron, with grease nipple from wheel Ø 150 mm, lacquered, color silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing, spherical roller bearing
    • electrically conductive, non-marking (-ELS)
    • cast nylon wheel center, hydrolysis resistant, (see series GSPOB)
    • drive wheel with hub keyway (see series GBN)
    • hub fitting wheel (see series GBA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GB
    POBS
    80–200 mm
    140–500 kg
    high-quality polyurethane elastomer Blickle Besthane® Soft, color blue
    to material description
    high-quality nylon 6, impact resistant, color black
    cast tread
    75 Shore A
    very good
    excellent
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing (C), ball bearing (CC)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) and ball bearing (CC) with integrated synthetic thread guard as standard
    Go to series POBS
    ALBS
    80–300 mm
    200–1,150 kg
    high-quality polyurethane elastomer Blickle Besthane® Soft, color blue
    to material description
    die-cast aluminum, color silver gray
    cast tread
    75 Shore A
    very good
    excellent
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • nylon wheel center, hydrolysis resistant, (see series POBS)
    • extremely crowned tread (-CO)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series ALBS
    GVU
    100–400 mm
    450–3,000 kg
    high-quality polyurethane elastomer Vulkollan®, color natural
    to material description
    rugged gray cast iron, with grease nipple from wheel Ø 150 mm, lacquered, color silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • drive wheel with hub keyway (see series GVUN)
    • hub fitting wheel (see series GVUA)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GVU
    PPN
    60–200 mm
    80–450 kg
    high-quality polypropylene, impact resistant, color natural white
    to material description
    high-quality polypropylene, impact resistant, color natural white
    60 Shore D
    satisfactory
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing
    • stainless steel roller bearing (-XR)
    • electrically conductive (PP-EL series)
    • thread guard (-FA)
    • color black (see PP series)
    • the load capacity reduces at ambient temperatures above +30 °C
    Go to series PPN
    PP
    60–200 mm
    80–450 kg
    high-quality polypropylene, impact resistant, color black
    to material description
    high-quality polypropylene, impact resistant, color black
    60 Shore D
    satisfactory
    very good
    satisfactory
    -20 °C to +60 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • electrically conductive, black (-EL)
    • stainless steel roller bearing (-XR)
    • thread guard (-FA)
    • color natural white (see PPN series)
    • the load capacity reduces at ambient temperatures above +30 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    Go to series PP
    POW
    100–125 mm
    200–220 kg
    high-quality nylon 6, impact resistant, color white
    to material description
    high-quality nylon 6, impact resistant, color white highly elastic cushion layer made from elastic solid rubber, color red
    highly elastic encapsulated cushion layer
    70 Shore D
    satisfactory
    very good
    good
    -20 °C to +80 °C
    ball bearing (C)
    • thread guard with ball bearing seal (-KFD)
    • the load capacity reduces at ambient temperatures above +35 °C
    • good noise absorption, absorbs impact and shocks
    • with integrated synthetic thread guard as standard
    • sandwich wheel
    Go to series POW
    PO
    50–300 mm
    75–1,500 kg
    high-quality nylon 6, impact resistant, color natural white
    to material description
    high-quality nylon 6, impact resistant, color natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, roller bearing, ball bearing (C), ball bearing
    • electrically conductive, non-marking, gray (-ELS)
    • stainless steel roller bearing (-XR)
    • stainless steel ball bearing (-XK)
    • stainless steel ball bearing and thread guard (-XKA)
    • grease nipple (-NI)
    • color blue, non-marking (C5017)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    • wheels with ball bearing (C) with integrated synthetic thread guard as standard
    Go to series PO
    SPO
    75–250 mm
    300–2,000 kg
    high-quality nylon 6, impact resistant, extremely robust heavy-duty version, color natural white
    to material description
    high-quality nylon 6, impact resistant, color natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • grease nipple (-NI)
    • thread guard (-FA)
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series SPO
  • 03 Wheels for heavy-duty casters 
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    GSPO
    G
    SVS
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    GSPO
    35–1,000 mm
    100–50,000 kg
    high-quality cast nylon, impact resistant, color natural beige
    material description
    high-quality cast nylon, impact resistant, color natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    ball bearing, spherical roller bearing
    • plain bore for static loads or very low speeds
    • stainless steel ball bearing (-XK)
    • spherical roller bearing (-PR) for applications requiring extensive travel
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series GSPO
    G
    80–250 mm
    250–1,400 kg
    rugged gray cast iron, lacquered, color silver
    material description
    rugged gray cast iron, with grease nipple
    180–220 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    plain bore, ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • plain bore: provide adequate lubrication on a regular basis
    • the primary purpose of coating is to protect the wheel during transport and storage. Coating remains resistant up to +120 °C
    Go to series G
    SVS
    65–300 mm
    750–15,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    • spherical roller bearing (-PR) for applications requiring extensive travel
    Go to series SVS
  • 04 Heat-resistant wheels
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    VEHI
    VKHT
    POSI
    ALSI
    POH
    POHI
    PHN
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    VEHI
    100–200 mm
    65–180 kg
    highly heat-resistant solid rubber Blickle TempLine® Basic, color black
    to material description
    pressed steel, zinc-plated, blue-passivated, Cr6-free
    tire pressed with rim
    80 Shore A
    very good
    satisfactory
    sufficient
    -25 °C to +200 °C
    roller bearing
    • majority of tire flattening recovers when in motion under load
    • passivation may be altered slightly in high temperatures, corrosion protection will remain unaffected
    Go to series VEHI
    VKHT
    100 mm
    100 kg
    highly heat-resistant solid rubber Blickle TempLine® Special, color black
    to material description
    highly heat-resistant nylon 6, impact resistant, color black
    pressed-on tire
    85 Shore A
    good
    satisfactory
    satisfactory
    -30 °C to +260 °C
    plain bore
    • PTFE coated stainless steel bushing (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +260 °C
    • tire flattening recovers when in motion under load
    Go to series VKHT
    POSI
    100–125 mm
    80–120 kg
    highly heat-resistant silicone rubber Blickle TempLine® Comfort, color black
    to material description
    highly heat-resistant thermoplastic, impact resistant, color dark gray
    vulcanised tire
    75 Shore A
    very good
    good
    satisfactory
    -20 °C to +250 °C
    plain bore
    • non-marking, gray tire (-SG)
    • PTFE coated stainless steel bushing (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
    • suitable for autoclaves
    Go to series POSI
    ALSI
    100 mm
    100 kg
    highly heat-resistant silicone rubber Blickle TempLine® Comfort, color black
    to material description
    die-cast aluminum, color silver gray
    vulcanised tire
    75 Shore A
    very good
    good
    satisfactory
    -25 °C to +250 °C
    plain bore, ball bearing
    • PTFE coated stainless steel bushing (-XAT)
    • oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
    • ball bearing with heat-resistant special grease (HK) and ball bearing cover (HKA)
    Go to series ALSI
    POH
    80–200 mm
    215–720 kg
    highly heat-resistant nylon Blickle TempLine® PerformanceLight, impact resistant, color natural
    to material description
    highly heat-resistant Blickle TempLine® PerformanceLight nylon, impact resistant, color natural
    85 Shore D
    satisfactory
    excellent
    good
    -25 °C to +170 °C
    plain bore, ball bearing
    • PTFE coated stainless steel bushing (-XAT)
    • stainless steel ball bearing with heat-resistant special grease (-HXK)
    • heavy-duty wheel center for higher loads (series SPOH)
    • oven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °C
    • suitable for autoclaves (plain bore version and version with stainless steel ball bearing with heat-resistant special grease (-HXK)
    • long-term use in high temperatures may cause the color to change, but will not affect load capacity
    Go to series POH
    POHI
    80–200 mm
    180–600 kg
    highly heat-resistant thermoplastic Blickle TempLine® Performance, impact resistant, color dark gray
    to material description
    highly heat-resistant thermoplastic, impact resistant, color dark gray
    85 Shore D
    satisfactory
    excellent
    satisfactory
    -25 °C to +250 °C
    plain bore, ball bearing
    • PTFE coated stainless steel bushing (-XAT)
    • stainless steel ball bearing with heat-resistant special grease (-HXK)
    • suitable for autoclaves (plain bore version and version with stainless steel ball bearing with heat-resistant special grease (-HXK)
    Go to series POHI
    PHN
    80–200 mm
    100–500 kg
    phenolic resin Blickle TempLine® Classic, impact resistant, color black
    to material description
    Blickle TempLine® Classic phenolic resin, impact resistant, color black
    90 Shore D
    satisfactory
    excellent
    sufficient
    -35 °C to +260 °C temporarily up to +300 °C
    plain bore, ball bearing
    • teflon-coated stainless steel bushing (-XAT)
    • wheels are only conditionally suitable for uneven floors and crossing thresholds
    Go to series PHN
  • 05 Guide rollers
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    FPU
    FPTH
    FTH
    FSTH
    FPOB
    FSVU
    FPO
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    FPU
    25–60 mm
    15–100 kg
    high-quality thermoplastic polyurethane (TPU), color brown
    to material description
    tread directly injected onto the ball bearing
    98 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • electrically conductive, non-marking (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series FPU
    FPTH
    60–125 mm
    110–290 kg
    high-quality thermoplastic polyurethane (TPU), color dark gray
    to material description
    high-quality nylon 6, impact resistant, color silver gray
    chemically bonded
    92 Shore A
    good
    very good
    very good
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • electrically conductive, non-marking (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    • hydrolysis resistant
    Go to series FPTH
    FTH
    30–75 mm
    25–150 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    tread directly casted onto the ball bearing
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +40 °C
    Go to series FTH
    FSTH
    40–125 mm
    60–375 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • antistatic, non-marking, gray (-AS)
    • with aluminum wheel center (series FALTH)
    • the load capacity reduces at ambient temperatures above +40 °C
    Go to series FSTH
    FPOB
    80–125 mm
    160–375 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    high-quality nylon 6, impact resistant, color black
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    • hydrolysis resistant
    Go to series FPOB
    FSVU
    40–100 mm
    70–250 kg
    high-quality polyurethane elastomer Vulkollan®, color natural
    to material description
    steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series FSVU
    FPO
    25–125 mm
    40–530 kg
    high-quality nylon 6, impact resistant, color natural white
    to material description
    tread directly injected onto the ball bearing
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    ball bearing
    • electrically conductive, non-marking, gray (-ELS)
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series FPO
  • 06 Flanged wheels 
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    SPKGSPO
    SPK
    SPKVS
    DSPKGSPO
    DSPK
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    SPKGSPO
    50–250 mm
    220–3,000 kg
    high-quality cast nylon, impact resistant, color natural beige
    to material description
    high-quality cast nylon, impact resistant, color natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • drive wheel with hub keyway (see series SPKGSPON)
    • the load capacity reduces at ambient temperatures above +35 °C
    • load capacities apply for rail profi les A 45, A 55 (DIN 536)
    Go to series SPKGSPO-DSPKGSPO
    SPK
    50–250 mm
    400–3,500 kg
    rugged gray cast iron, color silver
    to material description
    rugged gray cast iron, with grease nipple from wheel Ø 125 mm
    180–220 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    plain bore, ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • plain bore: provide adequate lubrication on a regular basis
    • load capacities apply for rail profi les A 45, A 55 (DIN 536)
    • the primary purpose of coating is to protect the wheel during transport and storage. Coating remains resistant up to +120 °C
    Go to series SPK
    SPKVS
    50–400 mm
    500–9,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    • heat-resistant ball bearing (oven bearing, -IK)
    • spherical roller bearing (-PR) for applications requiring extensive travel
    • drive wheel with hub keyway (see series SPKVSN)
    • load capacities apply for rail profi les A 45, A 55 and A 65 (DIN 536)
    Go to series SPKVS
    DSPKGSPO
    50–200 mm
    50–700 kg
    high-quality cast nylon, impact resistant, color natural beige
    to material description
    high-quality cast nylon, impact resistant, color natural beige
    80 Shore D
    satisfactory
    excellent
    very good
    -20 °C to +80 °C
    plain bore, ball bearing
    • stainless steel ball bearing (-XK)
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series DSPKGSPO
    DSPK
    50–200 mm
    120–1,200 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel
    190–230 HB
    sufficient
    excellent
    excellent
    -20 °C to +120 °C
    ball bearing
    Go to series DSPK
  • 07 Drive wheels
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    GEVN
    GTHN
    GSTN
    GBN
    GVUN
    SPKVSN
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    GEVN
    160–620 mm
    300–4,540 kg
    high-quality elastic solid rubber in drive-quality, with steel-band, color black, wheel Ø 400+500 mm: Smooth rolling quality, steel-wire reinforced
    to material description
    rugged gray cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, color anthracite
    steel-wired reinforced or pressed-on steel-band tire
    65 Shore A
    very good
    good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    hub keyway
    • pressed-on steel band in friction wheel quality (-STR)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel center is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GEVN
    GTHN
    75–1,000 mm
    300–25,000 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    rugged gray cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, color silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • antistatic, non-marking, gray (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series GTHN
    GSTN
    75–500 mm
    200–4,200 kg
    high-quality polyurethane elastomer Blickle Softhane®, color green
    to material description
    rugged gray cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, color silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • antistatic, non-marking, gray (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series GSTN
    GBN
    100–1,000 mm
    400–25,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    rugged gray cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, color silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • electrically conductive, non-marking (-ELS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GBN
    GVUN
    100–400 mm
    400–3,400 kg
    high-quality polyurethane elastomer Vulkollan®, color natural
    to material description
    rugged gray cast iron, axle bore and hub keyway in accordance with DIN 6885, lacquered, color silver
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub keyway
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GVUN
    SPKVSN
    200–300 mm
    2,500–7,000 kg
    heat-treatable steel, lightly-oiled surface
    to material description
    heat-treatable steel, axle bore and hub keyway in accordance with DIN 6885
    190–230 HB
    sufficient
    excellent
    excellent
    -100 °C to +600 °C
    hub keyway
    • load capacities apply for rail profiles A 45, A 55 and A 65 (DIN 536)
    • load capacity reduced by 50% at + 300 °C
    Go to series SPKVSN
  • 08 Hub fitting wheels
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    PA-402
    VLEA
    GEVA
    GSTA
    GBA
    VSVU
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    PA
    400–536 mm
    250–1,300 kg
    pneumatic tire, ribbed or zig-zag profile, 2 to 10 ply rating, color black
    to material description
    pressed steel, with central hole, fixing holes are counter-sunk for installation on standard hub fl anges, zinc-plated, blue-passivated, Cr6-free or lacquered, silver color
    tire mounted on rim
    60 Shore A
    excellent
    good
    satisfactory
    -30 °C to +50 °C
    hub fitting
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    Go to series PA
    VLEA
    405–525 mm
    950–1,885 kg
    super-elastic solid rubber, 3-component tire, highly-elastic cushion layer, abrasion-resistant tread, color black
    to material description
    heavy pressed steel, bolted (flat base rim), with central hole, fixing holes are counter-sunk for installation on standard hub flanges, zinc-plated, blue-passivated, Cr6-free
    steel-wire reinforced tire, mounted on rim
    70 Shore A
    very good
    good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    hub fitting
    • non-marking, gray tire (-SG)
    • antistatic, black tire (-AS)
    • drive wheel with hub keyway (see series VLEN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    • wheel width and diameter can change during operation
    • puncture-proof and maintenance- free
    Go to series VLEA
    GEVA
    250–620 mm
    630–4,540 kg
    high-quality elastic solid rubber in smooth rolling quality, color black
    to material description
    rugged gray cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, color anthracite
    steel-wire reinforced tire, pressed-on
    65 Shore A
    very good
    very good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    hub fitting
    • pressed-on steel band in drive quality (-STA)
    • the load capacity reduces at ambient temperatures above +60 °C
    • wheel center is approximately 4 mm wider than the specified wheel width
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GEVA
    GSTA
    200–400 mm
    700–2,500 kg
    high-quality polyurethane elastomer Blickle Softhane®, color green
    to material description
    rugged gray cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, color silver
    cast tread
    75 Shore A
    very good
    very good
    very good
    -30 °C to +70 °C temporarily up to +90 °C
    hub fitting
    • antistatic, non-marking, gray (-AS)
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series GSTA
    GBA
    200–400 mm
    900–3,400 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    rugged gray cast iron, with central hole, fixing holes are counter-sunk for installation on standard hub flanges, lacquered, color silver
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    hub fitting
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series GBA
    VSVU
    125–300 mm
    700–2,400 kg
    high-quality polyurethane elastomer Vulkollan®, color natural
    to material description
    heat-treatable steel
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    axle bore
    • individual turning
    • wheel with clamping set
    • the load capacity reduces at ambient temperatures above +40 °C
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series VSVU
  • 09 Rollers for pallet trucks
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    HTH
    HB
    HTHW
    HPO
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    HTH
    60–90 mm
    220–1,130 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • with Blickle Softhane® polyurethane tread (see series HST)
    • splash and washproof version (see series HTHW)
    • wheel center without ball bearing (ball bearing seat)
    • the load capacity reduces at ambient temperatures above +40 °C
    Go to series HTH
    HB
    80–85 mm
    550–960 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • nylon wheel center, hydrolysis resistant, (see series HPOB)
    • splash and washproof version (see series HBW)
    • wheel center without ball bearing (ball bearing seat)
    • the load capacity reduces at ambient temperatures above +40 °C
    Go to series HB
    HTHW
    82–85 mm
    550–1,060 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    metal
    cast tread
    92 Shore A
    good
    very good
    excellent
    -20 °C to +70 °C temporarily up to +90 °C
    ball bearing
    • with Blickle Besthane® polyurethane tread (see series HBW)
    • with Blickle Softhane® polyurethane tread (see series HSTW)
    • the load capacity reduces at ambient temperatures above +40 °C
    • nylon socket for splash and washproof ball bearing
    Go to series HTHW
    HPO
    80–85 mm
    420–1,100 kg
    high-quality nylon 6, impact resistant, color natural white
    to material description
    high-quality nylon 6, impact resistant, color natural white
    70 Shore D
    satisfactory
    excellent
    good
    -20 °C to +80 °C
    ball bearing
    • stainless steel ball bearing (-XK)
    • made from cast nylon, for applications requiring high load capacity (see HGSPO series)
    • the load capacity reduces at ambient temperatures above +35 °C
    Go to series HPO
  • 10 Forklift truck wheels
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    REV
    RTH
    RB
    RVU
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    REV
    215–254 mm
    high-quality elastic solid rubber in drive-quality, color black REV 215x82/60-5-SG: gray, non-marking
    to material description
    rugged grey cast iron or ductile cast iron
    vulcanised or steel-wire reinforced tire, pressed-on
    70 Shore A
    very good
    very good
    satisfactory
    -30 °C to +80 °C temporarily up to +100 °C
    • the load capacity reduces at ambient temperatures above +60 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    Go to series REV
    RTH
    200–270 mm
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    rugged gray cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    Go to series RTH
    RB
    230–343 mm
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    rugged gray cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    Go to series RB
    RVU
    230–250 mm
    high-quality polyurethane elastomer Vulkollan®, color natural
    to material description
    rugged gray cast iron or ductile cast iron
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • drive wheels are suitable for the manufacturer number specified in the product range 
    Go to series RVU
  • 11 Tires
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    BSEV
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    BSEV
    250–525 mm
    480–2,260 kg
    super-elastic solid rubber, 2-component or 3-component tires, tough rubber core, highly elastic, abrasion-resistant tread, color black
    to material description
    steel-wire reinforced
    70 Shore A
    very good
    good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, gray tire (-SG)
    • the load capacity reduces at ambient temperatures above +60 °C
    • speeds up to a maximum of 25 km/h are permitted with a reduced load capacity
    Go to series BSEV
  • 12 Press-on bands
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    BEV-ZGD
    BEV-ZST
    BTH
    BB
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    BEV...-ZDG
    125–610 mm
    190–2,700 kg
    high-quality elastic solid rubber in smooth rolling quality, color black
    to material description
    steel-wire reinforced
    65 Shore A
    very good
    very good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, natural color tire (-SN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • suitable for wheel center with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series BEV...-ZDG
    BEV...-ZST
    150–620 mm
    300–5,580 kg
    high-quality elastic solid rubber in drive-quality, color black
    to material description
    steel-band
    vulcanised tread
    65 Shore A
    very good
    very good
    good
    -30 °C to +80 °C temporarily up to +100 °C
    • non-marking, natural color tire (-SN)
    • the load capacity reduces at ambient temperatures above +60 °C
    • suitable for wheel center with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series BEV...-ZST
    BTH
    125–415 mm
    500–4,550 kg
    high-quality polyurethane elastomer Blickle Extrathane®, color light brown
    to material description
    steel-band
    cast tread
    92 Shore A
    good
    very good
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • suitable for wheel center with outer diameter tolerance h11
    • speeds up to a maximum of 10 km/h are permitted with a reduced load capacity
    Go to series BTH
    BB
    125–645 mm
    500–12,000 kg
    high-quality polyurethane elastomer Blickle Besthane®, color brown
    to material description
    steel-band
    cast tread
    92 Shore A
    good
    excellent
    excellent
    -30 °C to +70 °C temporarily up to +90 °C
    • the load capacity reduces at ambient temperatures above +40 °C
    • suitable for wheel center with outer diameter tolerance h11
    • speeds up to a maximum of 16 km/h are permitted with a reduced load capacity
    Go to series BB
  • 13 Heat-resistant Progressus wheels for casters
    Unfortunately, the product table is not available on mobile devices. Please turn your phone 90 degrees or switch to a tablet/computer to use this feature.
    PGV
    ALTPU
    Series
    Wheel-Ø
    Load capacity
    Tread / Tire
    Wheel center / rim
    Connection tread / tire with wheel center / rim
    Tread and tire hardness
    Operating noise / floor surface preservation
    Rolling resistance
    Wear resistance
    Non-marking
    Temperature resistance
    Bearing types
    Options
    Additional considerations
    PGV
    84–186 mm
    90–200 kg
    high-quality elastic solid rubber in smooth rolling quality, color gray, non-marking
    to material description
    die-cast aluminum, color silver gray
    tire mounted on rim
    80 Shore A
    very good
    very good
    satisfactory
    -20 °C to +134 °C
    roller bearing, ball bearing
    • electrically conductive (-EL)
    • suitable for autoclaves
    • tire flattening recovers when in motion under load
    ALTPU
    120–150 mm
    120–150 kg
    high-quality thermoplastic polyurethane (TPU), color dark gray, non-marking, electrically conductive
    to material description
    die-cast aluminum, color silver gray
    chemically bonded
    92 Shore A
    good
    very good
    very good
    -20 °C to +134 °C
    ball bearing
    • suitable for autoclaves
    • majority of tire flattening recovers when in motion under load