Telephone
+1 800 463 2526Ligth duty rigid caster with bolt hole fitting, Wheel with thermoplastic polyurethane tread, with nylon wheel center
Bracket:
Made of pressed steel. Bolted wheel axle. Zinc-plated, blue-passivated, Cr6-free.
Wheels:
Made of high-quality thermoplastic polyurethane, low-noise operation, low rolling and swivelling resistance, good floor preservation, very high abrasion resistance, chemically bonded for an inseparable connection to the wheel center.
-
Tread/tyre:
Made of high-quality thermoplastic polyurethane.
-
Wheel center/rim:
Made of high-quality, impact-resistant nylon. Chemically bonded.
-
Wheel center color:
gray
Technical data
Display in:
| Plate size | 57 |
| Bolt hole Ø | 13 |
| Wheel Ø | 125 mm (D) |
| Wheel width | 32 mm (T2) |
| Load capacity | 120 kg |
| Total height | 158 mm (H) |
| unit weight | 0,5 kg |
| Temperature resistance to | -25 ° C |
| Temperature resistance to | 70 ° C |
| tread and tire hardness | 94° Shore A |
| Bearing type | Ball bearing |
| Bolt hole Ø | 0,51 |
| Plate size | 2.24 |
| Wheel Ø | 4,9 inch (D) |
| Wheel width | 1,260 inch (T2) |
| Load capacity | 264 lbs |
| Total height | 6,2 inch (H) |
| unit weight | 1,1 lbs |
| Temperature resistance to | -13 °F |
| Temperature resistance to | 158 °F |
| tread and tire hardness | 94° Shore A |
| Bearing type: | Ball bearing |
