Products

Pressed steel swivel caster with top plate fitting and 'stop-fix' brake, Wheel with thermoplastic polyurethane tread, with nylon wheel center

Bracket:

Made of pressed steel, with double ball bearing in the swivel head, ball protection by the special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. Bolted wheel axle. Zinc-plated, blue-passivated, Cr6-free.

Wheels:

Made of high-quality thermoplastic polyurethane, low-noise operation, low rolling and swivelling resistance, good floor preservation, very high abrasion resistance, chemically bonded for an inseparable connection to the wheel center.

Tread/tyre:

Made of high-quality thermoplastic polyurethane.
Wheel center/rim:

Made of high-quality, impact-resistant nylon. Chemically bonded.
Wheel center color:

gray

Technical data

Display in:

Plate size	140 x 110
Bolt hole spacing	105 x 75-80
Bolt hole Ø	11
Wheel Ø	200 mm (D)
Wheel width	40 mm (T2)
Load capacity	300 kg
Total height	235 mm (H)
Offset swivel caster	54 mm
unit weight	2,5 kg
Temperature resistance to	-25 ° C
Temperature resistance to	70 ° C
tread and tire hardness	94° Shore A
Bearing type	Roller bearing

Bolt hole Ø	0,43
Plate size	5.51 x 4.33
Bolt hole spacing	4.13 x 2.95-3.15
Wheel Ø	7,9 inch (D)
Wheel width	1,575 inch (T2)
Load capacity	660 lbs
Total height	9,3 inch (H)
Offset swivel caster	2,1 inch
unit weight	5,4 lbs
Temperature resistance to	-13 °F
Temperature resistance to	158 °F
tread and tire hardness	94° Shore A
Bearing type:	Roller bearing