Telephone
+1 800 463 2526Pressed steel swivel caster with bolt hole fitting and 'stop-fix' brake, Wheel with thermoplastic rubber tread, with polypropylene wheel center
Bracket:
Made of pressed steel, with double ball bearing in the swivel head, strong central kingpin, ball protection by the special top plate and ball disc design. The special Blickle dynamic riveting process of the swivel head results in minimal swivel head play and smooth rolling characteristics with an increased service life achieved by the work hardening of the ball race grooves. Bolted wheel axle. Zinc-plated, blue-passivated, Cr6-free.
Wheels:
Made of high-quality thermoplastic rubber elastomer (TPE), high operational comfort, low-noise operation, low rolling and swivelling resistance, good floor preservation, chemically bonded for an inseparable connection to the wheel center.
-
Tread/tyre:
Made of thermoplastic rubber elastomer (TPE), contains traces of oil.
-
Wheel center/rim:
Made of high-quality, impact-resistant polypropylene. Chemically bonded.
-
Wheel center color:
gray
Technical data
Plate size | 70 |
Bolt hole Ø | 13 |
Wheel Ø | 100 mm (D) |
Wheel width | 32 mm (T2) |
Load capacity | 110 kg |
Total height | 125 mm (H) |
Offset swivel caster | 36 mm |
unit weight | 0,7 kg |
Temperature resistance to | -20 ° C |
Temperature resistance to | 60 ° C |
tread and tire hardness | 85° Shore A |
Bearing type | Ball bearing |
Bolt hole Ø | 0,51 |
Plate size | 2.76 |
Wheel Ø | 3,9 inch (D) |
Wheel width | 1,260 inch (T2) |
Load capacity | 242 lbs |
Total height | 4,9 inch (H) |
Offset swivel caster | 1,4 inch |
unit weight | 1,5 lbs |
Temperature resistance to | -4 °F |
Temperature resistance to | 140 °F |
tread and tire hardness | 85° Shore A |
Bearing type: | Ball bearing |
