Blickle flanged wheels

Flanged wheels are wheels that are used on rails, for example. They make sure that transport units remain in their rail during movements.

Blickle Räder+Rollen is a leading manufacturer of wheels and casters. With 900 employees across the globe, over 700 of which are based at the headquarters in Rosenfeld, Germany, Blickle is represented in over 120 countries worldwide. The comprehensive Blickle standard product range includes flanged wheels with a wheel Ø from 50 mm to 400 mm and a load capacity from 50 to 9,000 kg. On request, customer-specific flanged wheels are also produced.


 Blickle flanged wheels (brief overview)


Below you will find an overview of the Blickle flanged wheels series:

"SPK" cast iron flanged wheels

  • The SPK series flanged wheels are made of robust grey cast iron and lacquered, silver. The flange and the tread are machined, with horizontal taper of 3°. The rolling resistance is very low and the flanged wheels are extremely resistant to wear. The wheels are available with plain bore or with two pressed-in ball bearings lubricated with long-life grease. In addition, the flanged wheel is also available in combination with the 'BS' fixed bracket. The bracket is produced with reinforced forks for an improved absorption of axial forces.
  • Wheel Ø: 50 – 250 mm (from wheel Ø 125 without flange)
  • Load capacity: up to 110 kg

"SPKGSPO" flanged wheels made of compressed cast nylon

  • SPKGSPO series flanged wheels consist of impact-resistant, tough and highly compressed cast nylon. The tread has a horizontal taper of 3°. The flanged wheels are extremely abrasion-resistant. The wheels are available with plain bore or with two pressed-in ball bearings lubricated with long-life grease. This compressed cast nylon wheel is also available from Blickle as a double flanged wheel (DSPKGSPO).
  • Wheel Ø: 50 – 250 mm, double flanged wheels up to 200 mm
  • Load capacity: up to 3,000 kg, double flanged wheels up to 500 kg

"SPKVS" solid steel flanged wheels

  • SPKVS series flanged wheels are made of mild steel. They are supplied with a lightly oiled tread with horizontal taper of 3°. The flanged wheels are extremely wear-resistant and have a particularly high static and dynamic load capacity. The wheels are available two pressed-in ball bearings lubricated with long-life grease. On request, the flanged wheel is also available in combination with the ‘BS’ fixed bracket. The Blickle product range also features double flanged wheels made of solid steel up to a wheel Ø of 200 mm.
  • Wheel Ø: 50 – 400 mm, double flanged wheels up to 200 mm
  • Load capacity: up to 9,000 kg, double flanged wheels up to 1,000 kg