VPA…-EL – Wheel and caster series
Electrically conductive wheels and casters with solid rubber tire and synthetic rim
The wheels in the VPA series use a tire made of high-quality solid rubber with a hardness of 80 Shore A, cast onto a polypropylene rim. The VPA series is characterised by low rolling and swivel resistance. The electrically conductive rim and tread give these wheels a maximum resistance of 104 ohms.
The casters in the VPA…-EL series are frequently used for measuring and testing equipment or devices used in the pharmaceutical sector.
-
VPA…-EL – Wheels
The standard wheel sizes in the VPA…-EL series range between 3 ¹⁄₈ to 8 inch. A ball bearing is used as standard.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]VPA 50/6K-EL 2 ²³⁄₃₂ 65 ball bearing ¹⁄₄ ⁵⁷⁄₆₄ To the product VPA 75/6K-EL 3 1 100 ball bearing ¹⁄₄ 1 ³⁄₁₆ To the product VPA 80/8K-EL 3 ¹⁄₈ 1 130 ball bearing ⁵⁄₁₆ 1 ³⁄₈ To the product VPA 100/6K-EL 4 1 155 ball bearing ¹⁄₄ 1 ³⁄₁₆ To the product VPA 101/8K-EL 4 1 ¹⁄₄ 175 ball bearing ⁵⁄₁₆ 1 ³⁄₈ To the product VPA 125/8K-EL 5 1 165 ball bearing ⁵⁄₁₆ 1 ³⁄₈ To the product VPA 126/8K-EL 5 1 ¹⁄₄ 210 ball bearing ⁵⁄₁₆ 1 ³⁄₈ To the product VPA 150/8K-EL 6 1 ³⁄₁₆ 220 ball bearing ⁵⁄₁₆ 1 ³⁄₈ To the product -
VPA…-EL – Swivel casters with plate
As standard, the VPA…-EL series is available with the following rig series with top plate fitting:
LPA/LKPA series: Light duty swivel rig with top plate fitting
A detailed description of this rig series is available in the guide. Suitable brake systems for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LPA-VPA 50K-EL 2 ²³⁄₃₂ 65 ball bearing 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ To the product LPA-VPA 75K-EL 3 1 100 ball bearing 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ To the product LKPA-VPA 80K-EL 3 ¹⁄₈ 1 130 ball bearing 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LPA-VPA 100K-EL 4 1 155 ball bearing 4 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ⁵⁄₁₆ To the product LKPA-VPA 101K-EL 4 1 ¹⁄₄ 175 ball bearing 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-VPA 125K-EL 5 1 165 ball bearing 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-VPA 126K-EL 5 1 ¹⁄₄ 210 ball bearing 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LKPA-VPA 150K-EL 6 1 ³⁄₁₆ 220 ball bearing 7 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product -
VPA…-EL – Swivel casters with bolt hole
As standard, wheels in the VPA…-EL series are available with the following rig series with bolt hole fitting:
LRA/LKRA series: Light duty swivel rig with bolt hole
A detailed description of the LRA/LKRA rig is available in the guide. More information about the brake system versions available for each base product is listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LRA-VPA 50K-EL 2 ²³⁄₃₂ 65 ball bearing 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ To the product LRA-VPA 75K-EL 3 1 100 ball bearing 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ 1 ¹⁄₈ To the product LKRA-VPA 80K-11-EL 3 ¹⁄₈ 1 130 ball bearing 4 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-VPA 80K-EL 3 ¹⁄₈ 1 130 ball bearing 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LRA-VPA 100K-EL 4 1 155 ball bearing 4 ³⁄₄ 1 ¹¹⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆ To the product LKRA-VPA 101K-11-EL 4 1 ¹⁄₄ 175 ball bearing 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-VPA 101K-EL 4 1 ¹⁄₄ 175 ball bearing 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-VPA 125K-11-EL 5 1 165 ball bearing 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-VPA 125K-EL 5 1 165 ball bearing 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-VPA 126K-11-EL 5 1 ¹⁄₄ 210 ball bearing 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-VPA 126K-EL 5 1 ¹⁄₄ 210 ball bearing 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRA-VPA 150K-11-EL 6 1 ³⁄₁₆ 220 ball bearing 7 ³⁄₁₆ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRA-VPA 150K-EL 6 1 ³⁄₁₆ 220 ball bearing 7 ³⁄₁₆ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product -
VPA…-EL – Swivel casters with plug-in stem
The VPA series is available with the following rig series with a plug-in stem fitting type:
LRA series: Light duty swivel rig with plug-in stem
Refer to our guide for more information about this rig series. The brake systems available for each base product are provided in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Pin Ø
[inch]Pin
length
[inch]Offset
[inch]LRA-VPA 50K-EL-ES 2 ²³⁄₃₂ 65 ball bearing 2 ¹¹⁄₁₆ 1 ³⁄₁₆ ⁷⁄₈ To the product LRA-VPA 75K-EL-ES 3 1 100 ball bearing 3 ⁷⁄₈ 1 ³⁄₁₆ 1 ¹⁄₈ To the product LRA-VPA 100K-EL-ES 4 1 155 ball bearing 4 ³⁄₄ 1 ³⁄₁₆ 1 ⁵⁄₁₆ To the product -
VPA…-EL – Swivel casters with threaded pin
One type of rig available for wheels in the VPA series is the following swivel rig series which uses a threaded pin fitting:
LRA/LKRA series: Light duty swivel rig with threaded pin
A detailed description of the LRA and LKRA rig series is available in our guide. More information about the brake system versions for each base product is listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Thread
Pin
length
[inch]Offset
[inch]LRA-VPA 50K-EL-GS10 2 ²³⁄₃₂ 65 ball bearing 2 ¹¹⁄₁₆ M10 1 ³⁄₁₆ ⁷⁄₈ To the product LRA-VPA 75K-EL-GS10 3 1 100 ball bearing 3 ⁷⁄₈ M10 1 ³⁄₁₆ 1 ¹⁄₈ To the product LKRA-VPA 80K-EL-GS12 3 ¹⁄₈ 1 130 ball bearing 4 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LRA-VPA 100K-EL-GS10 4 1 155 ball bearing 4 ³⁄₄ M10 1 ³⁄₁₆ 1 ⁵⁄₁₆ To the product LKRA-VPA 101K-EL-GS12 4 1 ¹⁄₄ 175 ball bearing 5 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-VPA 125K-EL-GS12 5 1 165 ball bearing 6 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-VPA 126K-EL-GS12 5 1 ¹⁄₄ 210 ball bearing 6 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product LKRA-VPA 150K-EL-GS12 6 1 ³⁄₁₆ 220 ball bearing 7 ³⁄₁₆ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ To the product -
VPA…-EL – Rigid casters
Blickle also provides suitable casters with rigid rigs for all of the swivel caster series.
BPA/BKPA series: Light duty rigid rig with top plate fitting
BRA/BKRA series: Light duty rigid rig with bolt holeThe properties of each individual rigid caster series are listed in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]BPA-VPA 50K-EL 2 ²³⁄₃₂ 65 ball bearing 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRA-VPA 50K-EL 2 ²³⁄₃₂ 65 ball bearing 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPA-VPA 75K-EL 3 1 100 ball bearing 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRA-VPA 75K-EL 3 1 100 ball bearing 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ To the product BKPA-VPA 80K-EL 3 ¹⁄₈ 1 130 ball bearing 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRA-VPA 80K-EL 3 ¹⁄₈ 1 130 ball bearing 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-VPA 101K-EL 4 1 ¹⁄₄ 175 ball bearing 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRA-VPA 101K-EL 4 1 ¹⁄₄ 175 ball bearing 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-VPA 125K-EL 5 1 165 ball bearing 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRA-VPA 125K-EL 5 1 165 ball bearing 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-VPA 126K-EL 5 1 ¹⁄₄ 210 ball bearing 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRA-VPA 126K-EL 5 1 ¹⁄₄ 210 ball bearing 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPA-VPA 150K-EL 6 1 ³⁄₁₆ 220 ball bearing 7 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRA-VPA 150K-EL 6 1 ³⁄₁₆ 220 ball bearing 7 ³⁄₁₆ 2 ¹⁄₄ ¹⁄₂ To the product -
VPA…-EL – Twin casters
In addition to swivel and rigid casters, VPA...-EL wheels can also be provided as twin casters when combined with suitable rigs:
LDA series: Light duty twin wheel swivel rig with top plate fitting
LMDA series: Light duty twin wheel swivel rig with bolt holeA detailed description of the differences between rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Number of
wheels
Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LDA-VPA 50K-EL 2 ²³⁄₃₂ 2 130 ball bearing 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₄ To the product LMDA-VPA 50K-EL 2 ²³⁄₃₂ 2 130 ball bearing 2 ¹³⁄₁₆ 1 ⁵⁄₈ ³⁄₈ 1 ¹⁄₄ To the product LDA-VPA 75K-EL 3 1 2 200 ball bearing 4 2 ³⁄₈ x 2 ³⁄₈ 1 9/16 x 1 9/16 / 1 13/16 x 1 13/16 1 ⁵⁄₁₆ To the product LMDA-VPA 75K-EL 3 1 2 200 ball bearing 3 ⁷⁄₈ 2 ³⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆ To the product