PP – Wheel and caster series
Polypropylene wheels and casters in black
The wheels in the PP series are made from high-quality injection-moulded polypropylene. The wheels are highly resistant to a wide range of aggressive substances. With a hardness of 60 Shore D, the wheels offer a particularly low level of rolling resistance.
The wheels and casters in the PP series are primarily used for industrial and commercial applications. Many lightweight transport carts, retail shelving units and display stands are fitted with black polypropylene wheels and casters.
-
PP – Wheels
The wheels in the PP series come in sizes ranging between 2 ³⁄₈ and 8 inch in diameter as standard. They are also available with a ball bearing, roller bearing or plain bore. The PP…-EL series is suitable for applications where electrically conductive wheels are required. The wheels are also available in natural white PPN series.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]PP 60/12G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore ¹⁄₂ 1 ³⁄₈ To the product PP 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore ¹⁄₂ 1 ³⁄₈ To the product PP 80/12R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing ¹⁄₂ 1 ³⁄₈ To the product PP 100/12G 4 1 ⁷⁄₁₆ 355 plain bore ¹⁄₂ 1 ³⁄₄ To the product PP 100/12R 4 1 ⁷⁄₁₆ 355 roller bearing ¹⁄₂ 1 ³⁄₄ To the product PP 100/8KA 4 1 ⁷⁄₁₆ 355 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ To the product PP 125/12G 5 1 ⁹⁄₁₆ 440 plain bore ¹⁄₂ 1 ³⁄₄ To the product PP 125/12R 5 1 ⁹⁄₁₆ 440 roller bearing ¹⁄₂ 1 ³⁄₄ To the product PP 125/8KA 5 1 ⁹⁄₁₆ 440 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ To the product PP 150/20G 6 2 660 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product PP 150/20R 6 2 660 roller bearing ¹³⁄₁₆ 2 ³⁄₈ To the product PP 150/20K 6 2 660 ball bearing ¹³⁄₁₆ 2 ³⁄₈ To the product PP 200/20G 8 2 990 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product PP 200/20R 8 2 990 roller bearing ¹³⁄₁₆ 2 ³⁄₈ To the product PP 200/20K 8 2 990 ball bearing ¹³⁄₁₆ 2 ³⁄₈ To the product -
PP – Swivel casters with plate
As standard, the PP wheel series is available with two rig series with a top plate fitting. These vary in terms of their design and load capacity:
LE series: Pressed steel swivel rig with top plate fitting
L series: Pressed steel swivel rig with top plate fitting, medium duty designA detailed description of the rig series and the matching brake systems is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LE-PP 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ To the product LE-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-PP 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product L-PP 100G 4 1 ⁷⁄₁₆ 355 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LE-PP 100R 4 1 ⁷⁄₁₆ 330 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product L-PP 100R 4 1 ⁷⁄₁₆ 355 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LE-PP 100KA 4 1 ⁷⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product L-PP 100KA 4 1 ⁷⁄₁₆ 355 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LE-PP 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-PP 125G 5 1 ⁹⁄₁₆ 440 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-PP 125R 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-PP 125R 5 1 ⁹⁄₁₆ 440 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-PP 125KA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-PP 125KA 5 1 ⁹⁄₁₆ 440 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-PP 200G 8 2 660 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-PP 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product LE-PP 200R 8 2 660 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-PP 200R 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product LE-PP 200K 8 2 660 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-PP 200K 8 2 880 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product -
PP – Swivel casters with bolt hole
In addition to the casters with top plate fitting, the PP series is also available with a bolt hole fitting.
LER series: Pressed steel swivel rig with bolt hole
Refer to the guide for more information about the LER series. The brake system versions available for each base product are covered in greater detail in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LER-PP 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ To the product LER-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-PP 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LER-PP 100R 4 1 ⁷⁄₁₆ 330 roller bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LER-PP 100KA 4 1 ⁷⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LER-PP 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-PP 125R 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-PP 125KA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-PP 200G 8 2 660 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-PP 200R 8 2 660 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-PP 200K 8 2 660 ball bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product -
PP – Rigid casters
Blickle also provides suitable casters with rigid rigs for all of the swivel caster series.
B series: Pressed steel rigid rig with top plate fitting, medium duty design
Detailed information about the rigid rig is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-PP 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 100G 4 1 ⁷⁄₁₆ 355 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 100R 4 1 ⁷⁄₁₆ 355 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 100KA 4 1 ⁷⁄₁₆ 355 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 125G 5 1 ⁹⁄₁₆ 440 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 125R 5 1 ⁹⁄₁₆ 440 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 125KA 5 1 ⁹⁄₁₆ 440 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-PP 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-PP 200R 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-PP 200K 8 2 880 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product