POTHS – Stainless steel caster series
Stainless steel casters with soft thermoplastic polyurethane tread and heavy duty nylon wheel center
The tread of the POTHS series is made of a blue thermoplastic polyurethane (TPU) with a hardness of 80 Shore A. This is cast onto an impact-resistant nylon wheel center. The tire is non-marking and non-staining. It is also very gentle on the floor and quiet. The wheels in the POTHS series provide a very high level of operational comfort, alongside extremely low rolling and swivel resistance.
POTHS casters are completely corrosion-resistant and ideally suited for wet areas when combined with corrosion-resistant and vibration-ground finished chromium-nickel rigs, a corrosion-resistant roller or ball bearing and corrosion-resistant axle material.
The POTHS series is therefore the best solution when handling heavy loads in sensitive hygienic areas while reducing noise levels and providing exceptionally high operational comfort.
-
POTHS – Stainless steel swivel casters with plate
The POTHS wheel series is available with the following rigs with top plate fitting:
LEX series: Stainless steel swivel rig with top plate fitting
LX series: Stainless steel swivel rig with top plate fitting, medium duty designA detailed description of the rig series and the different brake systems is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LEX-POTHS 100G 4 1 ³⁄₈ 330 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LX-POTHS 100G 4 1 ³⁄₈ 440 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LEX-POTHS 100XR 4 1 ³⁄₈ 330 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LX-POTHS 100XR 4 1 ³⁄₈ 440 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LEX-POTHS 100XKA 4 1 ³⁄₈ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LX-POTHS 100XKA 4 1 ³⁄₈ 440 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LEX-POTHS 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LX-POTHS 125G 5 1 ⁹⁄₁₆ 550 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LEX-POTHS 125XR 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LX-POTHS 125XR 5 1 ⁹⁄₁₆ 550 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LEX-POTHS 125XKA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LX-POTHS 125XKA 5 1 ⁹⁄₁₆ 550 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LEX-POTHS 160G 6 ⁵⁄₁₆ 1 ³⁄₄ 660 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LX-POTHS 160G 6 ⁵⁄₁₆ 1 ³⁄₄ 880 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LEX-POTHS 160XR 6 ⁵⁄₁₆ 1 ³⁄₄ 660 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LX-POTHS 160XR 6 ⁵⁄₁₆ 1 ³⁄₄ 880 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LEX-POTHS 160XK 6 ⁵⁄₁₆ 1 ³⁄₄ 660 ball bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LX-POTHS 160XK 6 ⁵⁄₁₆ 1 ³⁄₄ 880 ball bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LEX-POTHS 200G 8 2 660 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LX-POTHS 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product LEX-POTHS 200XR 8 2 660 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LX-POTHS 200XR 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product LEX-POTHS 200XK 8 2 660 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LX-POTHS 200XK 8 2 880 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product -
POTHS – Stainless steel swivel casters with bolt hole
The POTHS series is available with the following swivel rig series with a bolt hole fitting:
LEXR series: Stainless steel swivel rig with bolt hole
A detailed description of the LEXR rig series is available in the guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LEXR-POTHS 100G 4 1 ³⁄₈ 330 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LEXR-POTHS 100XR 4 1 ³⁄₈ 330 roller bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LEXR-POTHS 100XKA 4 1 ³⁄₈ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LEXR-POTHS 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LEXR-POTHS 125XR 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LEXR-POTHS 125XKA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LEXR-POTHS 160G 6 ⁵⁄₁₆ 1 ³⁄₄ 660 plain bore 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-POTHS 160XR 6 ⁵⁄₁₆ 1 ³⁄₄ 660 roller bearing 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-POTHS 160XK 6 ⁵⁄₁₆ 1 ³⁄₄ 660 ball bearing 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-POTHS 200G 8 2 660 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-POTHS 200XR 8 2 660 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-POTHS 200XK 8 2 660 ball bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product -
POTHS – Stainless steel swivel casters with stem
The POTHS series is also available for the following rig series with a stem fitting as an alternative to a plate and bolt hole fitting.
LEXZ series: Stainless steel swivel rig with stem
The properties of this rig series are described in the guide. The brake systems which are available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Stem Ø
[inch]Stem length
[inch]Offset
[inch]LEXZ-POTHS 100G 4 1 ³⁄₈ 330 plain bore 4 ¹⁵⁄₁₆ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ⁷⁄₁₆ To the product LEXZ-POTHS 100XR 4 1 ³⁄₈ 330 roller bearing 4 ¹⁵⁄₁₆ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ⁷⁄₁₆ To the product LEXZ-POTHS 100XKA 4 1 ³⁄₈ 330 ball bearing (C) 4 ¹⁵⁄₁₆ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ⁷⁄₁₆ To the product LEXZ-POTHS 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ¹⁄₂ To the product LEXZ-POTHS 125XR 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ¹⁄₂ To the product LEXZ-POTHS 125XKA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ¹⁄₂ To the product LEXZ-POTHS 160G 6 ⁵⁄₁₆ 1 ³⁄₄ 660 plain bore 7 ¹¹⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEXZ-POTHS 160XR 6 ⁵⁄₁₆ 1 ³⁄₄ 660 roller bearing 7 ¹¹⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEXZ-POTHS 160XK 6 ⁵⁄₁₆ 1 ³⁄₄ 660 ball bearing 7 ¹¹⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEXZ-POTHS 200G 8 2 660 plain bore 9 ¹⁄₄ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEXZ-POTHS 200XR 8 2 660 roller bearing 9 ¹⁄₄ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEXZ-POTHS 200XK 8 2 660 ball bearing 9 ¹⁄₄ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product -
POTHS – Stainless steel rigid casters
The POTHS series provides matching rigid casters for all of the swivel caster series as part of the standard range:
BX series: Stainless steel rigid rig with top plate fitting
A detailed description of the BX rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BX-POTHS 100G 4 1 ³⁄₈ 440 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BX-POTHS 100XR 4 1 ³⁄₈ 440 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BX-POTHS 100XKA 4 1 ³⁄₈ 440 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BX-POTHS 125G 5 1 ⁹⁄₁₆ 550 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BX-POTHS 125XR 5 1 ⁹⁄₁₆ 550 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BX-POTHS 125XKA 5 1 ⁹⁄₁₆ 550 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BX-POTHS 160G 6 ⁵⁄₁₆ 1 ³⁄₄ 880 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BX-POTHS 160XR 6 ⁵⁄₁₆ 1 ³⁄₄ 880 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BX-POTHS 160XK 6 ⁵⁄₁₆ 1 ³⁄₄ 880 ball bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BX-POTHS 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BX-POTHS 200XR 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BX-POTHS 200XK 8 2 880 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product