VPP – Wheel and caster series
Wheels and casters with standard solid rubber tires and synthetic rim
The VPP series uses a standard solid rubber tire which is cast onto a high-quality impact-resistant polypropylene rim. The tires have a hardness of 80 Shore A and provide a very high level of operational comfort, good floor preservation and low-noise operation. Because it is puncture-proof, this series is also frequently used as a replacement for pneumatic tires. They are resistant to a wide range of aggressive substances and are therefore frequently used outdoors. They are also used for waste containers in hospitals, hygiene applications, cleaning equipment and compressors.
-
VPP – Wheels
The wheels in the VPP series come in sizes ranging between 3 ¹⁄₈ and 15 ³⁄₄ in diameter. Customers can choose between a ball bearing, roller bearing or plain bore. The wheel series is also available with a non-marking gray tire.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]VPP 80/12G 3 ¹⁄₈ 1 110 plain bore ¹⁄₂ 1 ³⁄₈ To the product VPP 80/12R 3 ¹⁄₈ 1 110 roller bearing ¹⁄₂ 1 ³⁄₈ To the product VPP 100/12G 4 1 ³⁄₁₆ 155 plain bore ¹⁄₂ 1 ³⁄₄ To the product VPP 100/15G 4 1 ³⁄₁₆ 155 plain bore ⁹⁄₁₆ 1 ³⁄₄ To the product VPP 100/12R 4 1 ³⁄₁₆ 155 roller bearing ¹⁄₂ 1 ³⁄₄ To the product VPP 100/15R 4 1 ³⁄₁₆ 155 roller bearing ⁹⁄₁₆ 1 ³⁄₄ To the product VPP 125/12G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore ¹⁄₂ 1 ²⁵⁄₃₂ To the product VPP 125/15G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore ⁹⁄₁₆ 1 ²⁵⁄₃₂ To the product VPP 125/12R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing ¹⁄₂ 1 ²⁵⁄₃₂ To the product VPP 125/15R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing ⁹⁄₁₆ 1 ²⁵⁄₃₂ To the product VPP 140/15G 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 plain bore ⁹⁄₁₆ 1 ²⁵⁄₃₂ To the product VPP 140/15R 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing ⁹⁄₁₆ 1 ²⁵⁄₃₂ To the product VPP 150/20G 6 1 ⁹⁄₁₆ 300 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 150/20R 6 1 ⁹⁄₁₆ 300 roller bearing ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 160/20-45G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore ¹³⁄₁₆ 1 ³⁄₄ To the product VPP 160/20G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 160/20-45R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing ¹³⁄₁₆ 1 ³⁄₄ To the product VPP 160/20R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 180/20G 7 ¹⁄₁₆ 2 375 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 180/20R 7 ¹⁄₁₆ 2 375 roller bearing ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 200/20G 8 2 450 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 200/25G 8 2 450 plain bore 1 2 ³⁄₈ To the product VPP 200/20R 8 2 450 roller bearing ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 200/20K 8 2 450 ball bearing ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 205/20G 8 2 ⁹⁄₁₆ 440 plain bore ¹³⁄₁₆ 2 ³⁄₈ To the product VPP 250/20-74G 10 2 ³⁄₈ 650 plain bore ¹³⁄₁₆ 2 ¹⁵⁄₁₆ To the product VPP 250/20G 10 2 ³⁄₈ 650 plain bore ¹³⁄₁₆ 2 ⁹⁄₁₆ To the product VPP 250/25-74G 10 2 ³⁄₈ 650 plain bore 1 2 ¹⁵⁄₁₆ To the product VPP 250/25G 10 2 ³⁄₈ 650 plain bore 1 2 ⁹⁄₁₆ To the product VPP 250/25R 10 2 ³⁄₈ 650 roller bearing 1 2 ⁹⁄₁₆ To the product VPP 250/20K 10 2 ³⁄₈ 650 ball bearing ¹³⁄₁₆ 2 ⁹⁄₁₆ To the product VPP 250/25K 10 2 ³⁄₈ 650 ball bearing 1 2 ⁹⁄₁₆ To the product VPP 254/25G 10 3 660 plain bore 1 2 ⁹⁄₁₆ To the product VPP 256/20G 10 3 ³⁄₈ 550 plain bore ¹³⁄₁₆ 3 To the product VPP 256/20R 10 3 ³⁄₈ 550 roller bearing ¹³⁄₁₆ 3 To the product VPP 300/25G 12 2 ³⁄₈ 550 plain bore 1 2 ³⁄₈ To the product VPP 355/25R 14 3 660 roller bearing 1 3 To the product VPP 400/25G 15 ³⁄₄ 4 770 plain bore 1 3 To the product VPP 400/25R 15 ³⁄₄ 4 770 roller bearing 1 3 To the product -
VPP – Swivel casters with plate
As standard, the VPP series is available with various rig series with a top plate fitting. These vary in terms of their design depending on the application conditions or the required load capacity:
L series: Pressed steel swivel rig with top plate fitting, medium duty design
The guide provides a detailed comparison of the rig series which are available. Suitable brake systems for each base product are provided in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LE-VPP 80G 3 ¹⁄₈ 1 110 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-VPP 80G 3 ¹⁄₈ 1 110 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-VPP 80R 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-VPP 80R 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-VPP 100G 4 1 ³⁄₁₆ 155 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product L-VPP 100G 4 1 ³⁄₁₆ 155 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LE-VPP 100R 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product L-VPP 100R 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LE-VPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-VPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LE-VPP 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-VPP 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product L-VPP 140G 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 plain bore 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 To the product L-VPP 140R 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 To the product LE-VPP 150G 6 1 ⁹⁄₁₆ 300 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LE-VPP 150R 6 1 ⁹⁄₁₆ 300 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LE-VPP 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-VPP 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-VPP 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-VPP 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-VPP 180G 7 ¹⁄₁₆ 2 375 plain bore 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 To the product L-VPP 180G 7 ¹⁄₁₆ 2 375 plain bore 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-VPP 180R 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 To the product L-VPP 180R 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ To the product LE-VPP 200G 8 2 450 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-VPP 200G 8 2 450 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product LE-VPP 200R 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product L-VPP 200R 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ To the product L-VPP 250G-3 10 2 ³⁄₈ 650 plain bore 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₁₆ To the product L-VPP 250R-3 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₁₆ To the product -
VPP – Swivel casters with bolt hole
As an alternative to a top plate fitting, the VPP series is also available with a bolt hole fitting.
LER series: Pressed steel swivel rig with bolt hole
Refer to the guide for more information about the LER series. The brake system versions available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LER-VPP 80G 3 ¹⁄₈ 1 110 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-VPP 80R 3 ¹⁄₈ 1 110 roller bearing 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-VPP 100G 4 1 ³⁄₁₆ 155 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LER-VPP 100R 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LER-VPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-VPP 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LER-VPP 150G 6 1 ⁹⁄₁₆ 300 plain bore 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-VPP 150R 6 1 ⁹⁄₁₆ 300 roller bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-VPP 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-VPP 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-VPP 180G 7 ¹⁄₁₆ 2 375 plain bore 8 ⁷⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 To the product LER-VPP 180R 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 To the product LER-VPP 200G 8 2 450 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LER-VPP 200R 8 2 450 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product -
VPP – Swivel casters with stem
The VPP series is available with a stem fitting as an alternative to a plate and bolt hole fitting.
LEZ series: Pressed steel swivel rig with stem
A detailed description of the LEZ series is available in the guide. The brake systems available for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Stem Ø
[inch]Stem length
[inch]Offset
[inch]LEZ-VPP 80G 3 ¹⁄₈ 1 110 plain bore 4 ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ¹⁄₂ To the product LEZ-VPP 100G 4 1 ³⁄₁₆ 155 plain bore 4 ¹⁵⁄₁₆ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ⁷⁄₁₆ To the product LEZ-VPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore 5 ⁷⁄₈ ¹³⁄₁₆ 1 ¹⁵⁄₁₆ 1 ¹⁄₂ To the product LEZ-VPP 150G-22 6 1 ⁹⁄₁₆ 300 plain bore 7 ¹⁄₂ ⁷⁄₈ 2 ³⁄₈ 2 ¹⁄₈ To the product LEZ-VPP 150G-27 6 1 ⁹⁄₁₆ 300 plain bore 7 ¹⁄₂ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEZ-VPP 160G-22 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore 7 ¹¹⁄₁₆ ⁷⁄₈ 2 ³⁄₈ 2 ¹⁄₈ To the product LEZ-VPP 160G-27 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore 7 ¹¹⁄₁₆ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product LEZ-VPP 200G-22 8 2 450 plain bore 9 ¹⁄₄ ⁷⁄₈ 2 ³⁄₈ 2 ¹⁄₈ To the product LEZ-VPP 200G-27 8 2 450 plain bore 9 ¹⁄₄ 1 ¹⁄₁₆ 2 ³⁄₈ 2 ¹⁄₈ To the product -
VPP – Rigid casters
Blickle also provides suitable casters with rigid rigs for all of the swivel caster series.
B series: Pressed steel rigid rig with top plate fitting, medium duty design
BH series: Pressed steel rigid rig with top plate fitting, heavy duty designDetailed information about our rigid rigs is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-VPP 80G 3 ¹⁄₈ 1 110 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-VPP 80R 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-VPP 100G 4 1 ³⁄₁₆ 155 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-VPP 100R 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-VPP 125G 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-VPP 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product B-VPP 140G 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 plain bore 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 140R 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 150G 6 1 ⁹⁄₁₆ 300 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 150R 6 1 ⁹⁄₁₆ 300 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 160R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 180G 7 ¹⁄₁₆ 2 375 plain bore 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 180R 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 200G 8 2 450 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product B-VPP 200R 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BH-VPP 250G 10 2 ³⁄₈ 650 plain bore 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BH-VPP 250R 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product