FSVU – Guide roller series

Guide rollers with polyurethane tread Vulkollan® and steel wheel center

Blicke’s FSVU series are guide rollers with a Vulkollan® tread. This tread is cast directly onto the steel wheel center to provide a very good chemical bond. The ball bearing is sealed on both sides, pressed into the wheel center and secured with a locking ring. The FSVU series is particularly resistant to abrasion and cuts and tear propagation. It also provides a low level of rolling resistance. The series has a high dynamic load capacity and is suitable for use at high speeds, like FPOB guide rollers.
Products in the FSVU series are typically used as rollers in lift systems and conveyor belt systems.

  • FSVU – Guide rollers

    Blickle’s range includes Vulkollan® guide rollers in sizes ranging from1 ⁹⁄₁₆ to 4 inch in diameter. These can be used at speeds up to 6 mph with a reduced load capacity.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Load capacity
    at 6 mph
    [lbs]
    Ball bearing


    Axle bore Ø

    [inch]
    Clamping
    length
    [inch]
    FSVU 40x15/10-8K 1 ⁹⁄₁₆ ⁹⁄₁₆ 155 110 6000 2RS ³⁄₈ ⁵⁄₁₆
    FSVU 50x18/17-10K 2 ¹¹⁄₁₆ 220 155 6003 2RS ¹¹⁄₁₆ ³⁄₈
    FSVU 60x20/20-12K 2 ³⁄₈ ¹³⁄₁₆ 300 210 6004 2RS ¹³⁄₁₆ ¹⁄₂
    FSVU 70x25/25-15K 2 ³⁄₄ 1 440 310 6205 2RS 1 ⁹⁄₁₆
    FSVU 80x25/25-15K 3 ¹⁄₈ 1 505 355 6205 2RS 1 ⁹⁄₁₆
    FSVU 100x25/25-15K 4 1 550 385 6205 2RS 1 ⁹⁄₁₆