ALSI – Wheel and caster series
Heat-resistant Blickle TempLine® Comfort wheels and casters with silicone rubber tread and aluminum wheel center
The heat-resistant wheels in the ALSI series use a die-cast aluminum wheel center with a vulcanised, highly heat-resistant silicone rubber with a hardness of 75 Shore A. The wheels provide a low level of starting and rolling resistance, excellent floor surface preservation and low-noise operation. The ALSI series is fitted with a ball bearing or plain bore as standard. They can be used at temperatures between -4 °F and +482 °F.
The heat-resistant and floor-preserving wheels of the ALSI series are frequently used in bakeries.
-
ALSI – Wheels
The standard ALSI series includes wheels with a size of 4 inch. Customers can choose between a plain bore and a heat-resistant ball bearing. Blickle provides a PTFE-coated stainless steel axle tube for the plain bore version.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]ALSI 100/12G 4 1 ⁹⁄₁₆ 220 plain bore ¹⁄₂ 1 ³⁄₄ ALSI 100/8HKA 4 1 ⁹⁄₁₆ 220 ball bearing ⁵⁄₁₆ 1 ¹³⁄₁₆ ALSI 100/15HK 4 1 ⁹⁄₁₆ 220 ball bearing ⁹⁄₁₆ 1 ³⁄₄ -
ALSI – Swivel casters with plate
The wheels in the ALSI series are available as casters with a plate fitting in combination with the following rig series:
LI series: Heat-resistant pressed steel swivel rig with top plate fitting, medium duty design
A detailed description of the rig series is available in our guide.The brake system versions available for each base product are covered in greater detail in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LI-ALSI 100G 4 1 ⁹⁄₁₆ 220 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LI-ALSI 100HKA 4 1 ⁹⁄₁₆ 220 ball bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ -
ALSI – Swivel casters with bolt hole
Blickle also provides a bolt hole fitting in addition to the plate fitting option. The following swivel rig is used for this purpose:
LIR series: Heat-resistant pressed steel swivel rig with bolt hole, medium duty version
A detailed description of the rig series and suitable brake systems is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LIR-ALSI 100G 4 1 ⁹⁄₁₆ 220 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LIR-ALSI 100HKA 4 1 ⁹⁄₁₆ 220 ball bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ -
ALSI – Rigid casters
Blickle uses the following rig series for the heat-resistant rigid casters in the ALSI series to match the swivel caster series:
B series: Heat-resistant pressed steel rigid rig with top plate fitting, medium duty design
A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-ALSI 100G 4 1 ⁹⁄₁₆ 220 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-ALSI 100HKA 4 1 ⁹⁄₁₆ 220 ball bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8