VSTH – caster series

Light duty wheels and casters with Blickle Extrathane® polyurethane tread and steel wheel center

VSTH light duty wheel and caster series
The tread of the VSTH series consists of the high-quality, reaction-injected polyurethane Blickle Extrathane®. This is cast onto the steel wheel center. It is non-marking, non-staining and has a hardness of 92 Shore A. This gives the VSTH series a very low level of rolling and swivel resistance.

The VSTH series is mainly used for applications where a low mounting height is required, e.g. server racks oder furniture.
  • VSTH – Swivel casters with plate
    VSTH – Swivel casters with plate

    As standard, the VSTH series is available with the following rig series with top plate fitting:

    LPA/LKPA series: Light duty swivel rig with top plate fitting

    A detailed description of the rig series is available in our guide. The brake systems available for each base product are listed after you make your selection.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 1.9 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]    		 Offset

    [inch]
    LPA-VSTH 35K 1 ³⁄₈ 1 ¹⁄₁₆ 220 ball bearing 2 ¹⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁹⁄₁₆
    LKPA-VSTH 50K-12 2 1 ⁵⁄₁₆ 330 ball bearing 2 ⁷⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ¹⁄₈
    LKPA-VSTH 50K 2 1 ⁵⁄₁₆ 330 ball bearing 2 ⁷⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ¹⁄₈
    To the product finder
  • VSTH – Swivel casters with bolt hole
    VSTH Swivel casters with bolt hole

    As an alternative to other fitting types, the wheels in the VSTH series are also available with rigs with a bolt hole fitting.

    LRA/LKRA series: Light duty swivel rig with bolt hole

    A detailed description of the rig series is available in the guide. More information about the brake system versions available for each base product is listed in the relevant section.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 1.9 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate Ø

    [inch]    		 Bolt
    hole Ø
    [inch]    		 Offset

    [inch]
    LRA-VSTH 35K 1 ³⁄₈ 1 ¹⁄₁₆ 220 ball bearing 1 ¹⁵⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁹⁄₁₆
    LKRA-VSTH 50K 2 1 ⁵⁄₁₆ 330 ball bearing 2 ³⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ¹⁄₈
    LR-VSTH 60K 2 ³⁄₈ 1 ³⁄₈ 440 ball bearing 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈
    LKR-VSTH 65K 2 ⁹⁄₁₆ 1 ⁹⁄₁₆ ball bearing 3 ⁷⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 1 ⁵⁄₈
    To the product finder
  • VSTH – Swivel casters with threaded pin
    VSTH Swivel casters with threaded pin

    The VSTH series is available with the following rig series with a threaded pin:

    LRA/LKRA series: Light duty swivel rig with threaded pin

    Refer to our guide. for more information about this light duty rig. The brake systems available for each base product are provided in the relevant section.


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 1.9 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Thread


    		 Pin
    length
    [inch]    		 Offset

    [inch]
    LRA-VSTH 35K-GS10 1 ³⁄₈ 1 ¹⁄₁₆ 175 ball bearing 1 ¹⁵⁄₁₆ M10 1 ³⁄₁₆ ⁹⁄₁₆
    LKRA-VSTH 50K-GS12 2 1 ⁵⁄₁₆ 330 ball bearing 2 ³⁄₄ M12 1 ³⁄₁₆ 1 ¹⁄₈
    To the product finder