PP – Wheel and caster series
Polypropylene wheels and casters in black
The wheels in the PP series are made from high-quality injection-moulded polypropylene. The wheels are highly resistant to a wide range of aggressive substances. With a hardness of 60 Shore D, the wheels offer a particularly low level of rolling resistance.
The wheels and casters in the PP series are primarily used for industrial and commercial applications. Many lightweight transport carts, retail shelving units and display stands are fitted with black polypropylene wheels and casters.
-
PP – Wheels
The wheels in the PP series come in sizes ranging between 2 ³⁄₈ and 8 inch in diameter as standard. They are also available with a ball bearing, roller bearing or plain bore. The PP…-EL series is suitable for applications where electrically conductive wheels are required. The wheels are also available in natural white PPN series.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]PP 60/12G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore ¹⁄₂ 1 ³⁄₈ PP 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore ¹⁄₂ 1 ³⁄₈ PP 80/12R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing ¹⁄₂ 1 ³⁄₈ PP 100/12G 4 1 ⁷⁄₁₆ 355 plain bore ¹⁄₂ 1 ³⁄₄ PP 100/12R 4 1 ⁷⁄₁₆ 355 roller bearing ¹⁄₂ 1 ³⁄₄ PP 100/8KA 4 1 ⁷⁄₁₆ 355 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ PP 125/12G 5 1 ⁹⁄₁₆ 440 plain bore ¹⁄₂ 1 ³⁄₄ PP 125/12R 5 1 ⁹⁄₁₆ 440 roller bearing ¹⁄₂ 1 ³⁄₄ PP 125/8KA 5 1 ⁹⁄₁₆ 440 ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ PP 150/20G 6 2 660 plain bore ¹³⁄₁₆ 2 ³⁄₈ PP 150/20R 6 2 660 roller bearing ¹³⁄₁₆ 2 ³⁄₈ PP 150/20K 6 2 660 ball bearing ¹³⁄₁₆ 2 ³⁄₈ PP 200/20G 8 2 990 plain bore ¹³⁄₁₆ 2 ³⁄₈ PP 200/20R 8 2 990 roller bearing ¹³⁄₁₆ 2 ³⁄₈ PP 200/20K 8 2 990 ball bearing ¹³⁄₁₆ 2 ³⁄₈ -
PP – Swivel casters with plate
As standard, the PP wheel series is available with two rig series with a top plate fitting. These vary in terms of their design and load capacity:
LE series: Pressed steel swivel rig with top plate fitting
L series: Pressed steel swivel rig with top plate fitting, medium duty designA detailed description of the rig series and the matching brake systems is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LE-PP 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈ LE-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PP 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-PP 100G 4 1 ⁷⁄₁₆ 355 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LE-PP 100R 4 1 ⁷⁄₁₆ 330 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-PP 100R 4 1 ⁷⁄₁₆ 355 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LE-PP 100KA 4 1 ⁷⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-PP 100KA 4 1 ⁷⁄₁₆ 355 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ LE-PP 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PP 125G 5 1 ⁹⁄₁₆ 440 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PP 125R 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PP 125R 5 1 ⁹⁄₁₆ 440 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PP 125KA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-PP 125KA 5 1 ⁹⁄₁₆ 440 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ LE-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ L-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ LE-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ L-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ LE-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ L-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ LE-PP 200G 8 2 660 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ L-PP 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ LE-PP 200R 8 2 660 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ L-PP 200R 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ LE-PP 200K 8 2 660 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ L-PP 200K 8 2 880 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ -
PP – Swivel casters with bolt hole
In addition to the casters with top plate fitting, the PP series is also available with a bolt hole fitting.
LER series: Pressed steel swivel rig with bolt hole
Refer to the guide for more information about the LER series. The brake system versions available for each base product are covered in greater detail in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LER-PP 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈ LER-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PP 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-PP 100R 4 1 ⁷⁄₁₆ 330 roller bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-PP 100KA 4 1 ⁷⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-PP 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PP 125R 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PP 125KA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PP 200G 8 2 660 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PP 200R 8 2 660 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-PP 200K 8 2 660 ball bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ -
PP – Rigid casters
Blickle also provides suitable casters with rigid rigs for all of the swivel caster series.
B series: Pressed steel rigid rig with top plate fitting, medium duty design
Detailed information about the rigid rig is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-PP 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 100G 4 1 ⁷⁄₁₆ 355 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 100R 4 1 ⁷⁄₁₆ 355 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 100KA 4 1 ⁷⁄₁₆ 355 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 125G 5 1 ⁹⁄₁₆ 440 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 125R 5 1 ⁹⁄₁₆ 440 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 125KA 5 1 ⁹⁄₁₆ 440 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-PP 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PP 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PP 150K 6 2 660 ball bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PP 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PP 200R 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-PP 200K 8 2 880 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32