PPN – Wheel and caster series

Polypropylene wheels and casters in natural white

The wheels in the PPN series are made from high-quality injection-moulded polypropylene. With a hardness of 60 Shore D, the wheels offer a particularly low level of rolling resistance.

The PPN series is frequently used in the food- or pharmaceuticals industry due to its high level of chemical resistance to a wide variety of aggressive substances. Black polypropylene wheels are also available PP series in addition to the natural white wheels.

  • PPN – Wheels

    The wheels in the PPN series are available in sizes between 2 ³⁄₈ and 8 inch as standard. The wheels use either a plain bore or roller bearing. Electrically conductive versions PP…-EL series are also available in the Blickle range.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Axle bore Ø

    [inch]
    Hub
    length
    [inch]
    PPN 60/12G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore ¹⁄₂ 1 ³⁄₈
    PPN 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore ¹⁄₂ 1 ³⁄₈
    PPN 80/12R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing ¹⁄₂ 1 ³⁄₈
    PPN 100/12G 4 1 ⁷⁄₁₆ 355 plain bore ¹⁄₂ 1 ³⁄₄
    PPN 100/12R 4 1 ⁷⁄₁₆ 355 roller bearing ¹⁄₂ 1 ³⁄₄
    PPN 125/12G 5 1 ⁹⁄₁₆ 440 plain bore ¹⁄₂ 1 ³⁄₄
    PPN 125/12R 5 1 ⁹⁄₁₆ 440 roller bearing ¹⁄₂ 1 ³⁄₄
    PPN 150/20G 6 2 660 plain bore ¹³⁄₁₆ 2 ³⁄₈
    PPN 150/20R 6 2 660 roller bearing ¹³⁄₁₆ 2 ³⁄₈
    PPN 200/20G 8 2 990 plain bore ¹³⁄₁₆ 2 ³⁄₈
    PPN 200/20R 8 2 990 roller bearing ¹³⁄₁₆ 2 ³⁄₈
  • PPN – Swivel casters with plate

    The PPN wheel series is available with a variety of rigs with a plate fitting as part of the standard range. These vary in terms of their design:

    LE series: Pressed steel swivel rig with top plate fitting
    L series: Pressed steel swivel rig with top plate fitting, medium duty design

    A detailed description and a comparison of the rig series are available in the guide. The various brake systems available for each base product are listed in the relevant section.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    LE-PPN 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ³⁄₈
    LE-PPN 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-PPN 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    LE-PPN 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-PPN 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    LE-PPN 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
    L-PPN 100G 4 1 ⁷⁄₁₆ 355 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
    LE-PPN 100R 4 1 ⁷⁄₁₆ 330 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
    L-PPN 100R 4 1 ⁷⁄₁₆ 355 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
    LE-PPN 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-PPN 125G 5 1 ⁹⁄₁₆ 440 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    LE-PPN 125R 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    L-PPN 125R 5 1 ⁹⁄₁₆ 440 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂
    LE-PPN 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈
    L-PPN 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    LE-PPN 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈
    L-PPN 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈
    LE-PPN 200G 8 2 660 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈
    L-PPN 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
    LE-PPN 200R 8 2 660 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈
    L-PPN 200R 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆
  • PPN – Swivel casters with bolt hole

    The PPN series is also available with a bolt hole fitting as an alternative to a plate fitting.

    LER series: Pressed steel swivel rig with bolt hole

    A detailed description of the LER rig is available in the guide. The brake system versions for each base product are listed in the relevant section.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate Ø

    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    LER-PPN 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ³⁄₈
    LER-PPN 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂
    LER-PPN 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂
    LER-PPN 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆
    LER-PPN 100R 4 1 ⁷⁄₁₆ 330 roller bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆
    LER-PPN 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂
    LER-PPN 125R 5 1 ⁹⁄₁₆ 330 roller bearing 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂
    LER-PPN 150G 6 2 660 plain bore 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈
    LER-PPN 150R 6 2 660 roller bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈
    LER-PPN 200G 8 2 660 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈
    LER-PPN 200R 8 2 660 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈
  • PPN – Rigid casters

    Blickle also provides suitable rigid casters in addition to swivel casters.

    B series: Pressed steel rigid rig with top plate fitting, medium duty design

    A detailed description of the rigid rig is available in our guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    B-PPN 60G 2 ³⁄₈ 1 ¹⁄₈ 175 plain bore 3 ¹⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 80R 3 ¹⁄₈ 1 ¹⁄₄ 265 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 100G 4 1 ⁷⁄₁₆ 355 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 100R 4 1 ⁷⁄₁₆ 355 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 125G 5 1 ⁹⁄₁₆ 440 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 125R 5 1 ⁹⁄₁₆ 440 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-PPN 150G 6 2 660 plain bore 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-PPN 150R 6 2 660 roller bearing 7 ¹⁄₂ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-PPN 200G 8 2 880 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32
    B-PPN 200R 8 2 880 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32