V – Wheel and caster series
Wheels and casters with standard solid rubber tires and pressed steel rim, reinforced version
The standard solid rubber tire of the V series is pressed or bolted together with a stamped pressed steel rim and the bearing. The tires have a hardness of 80 Shore A and provide a high level of operational comfort, good floor preservation and low-noise operation. In contrast to the VE wheel series, the V series is suitable for higher loads.
The V series is frequently used for manually operated transport units, as support wheels for trailers and in a wide range of small units.
-
V – Wheels
Wheels in the V series have diameters ranging between 3 ¹⁄₈ and 15 ³⁄₄ with a roller bearing, ball bearing or plain bore. The wheels are also available with a non-marking gray tire or with an electrically conductive design.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]V 80/12R 3 ¹⁄₈ 1 110 roller bearing ¹⁄₂ 1 ³⁄₈ V 100/15R 4 1 ³⁄₁₆ 155 roller bearing ⁹⁄₁₆ 1 ³⁄₄ V 125/15R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing ⁹⁄₁₆ 1 ²⁵⁄₃₂ V 140/15R 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing ⁹⁄₁₆ 1 ²⁵⁄₃₂ V 162/20G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 plain bore ¹³⁄₁₆ 2 ³⁄₈ V 162/20R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing ¹³⁄₁₆ 2 ³⁄₈ V 182/20G 7 ¹⁄₁₆ 2 375 plain bore ¹³⁄₁₆ 2 ³⁄₈ V 182/20R 7 ¹⁄₁₆ 2 375 roller bearing ¹³⁄₁₆ 2 ³⁄₈ V 184/20-50K 7 ¹⁄₁₆ 3 ¹⁄₈ 660 ball bearing ¹³⁄₁₆ 2 V 202/20G 8 2 450 plain bore ¹³⁄₁₆ 2 ³⁄₈ V 202/20R 8 2 450 roller bearing ¹³⁄₁₆ 2 ³⁄₈ V 202/25R 8 2 450 roller bearing 1 2 ³⁄₈ V 200/20K 8 2 450 ball bearing ¹³⁄₁₆ 2 ³⁄₈ V 205/20R 8 2 ⁹⁄₁₆ 495 roller bearing ¹³⁄₁₆ 2 ³⁄₈ V 252/20G 10 2 ³⁄₈ 650 plain bore ¹³⁄₁₆ 2 ⁹⁄₁₆ V 252/25G 10 2 ³⁄₈ 650 plain bore 1 2 ⁹⁄₁₆ V 252/25R 10 2 ³⁄₈ 650 roller bearing 1 2 ⁹⁄₁₆ V 250/25K 10 2 ³⁄₈ 650 ball bearing 1 2 ⁹⁄₁₆ V 254/25-65R 10 3 705 roller bearing 1 2 ⁹⁄₁₆ V 256/20-75K 10 3 ³⁄₈ 770 ball bearing ¹³⁄₁₆ 3 V 256/25-75K 10 3 ³⁄₈ 770 ball bearing 1 3 V 265/25-75G 10 ⁷⁄₁₆ 2 ¹⁄₂ 1,765 plain bore 1 3 V 282/25R 11 2 ³⁄₄ 850 roller bearing 1 3 V 302/30-55G 12 2 ³⁄₈ 1,545 plain bore 1 ³⁄₁₆ 2 ³⁄₁₆ V 302/25-50R 12 2 ³⁄₈ 660 roller bearing 1 2 V 302/25-75R 12 2 ³⁄₈ 660 roller bearing 1 3 V 350/25-80R 14 2 ³⁄₄ 660 roller bearing 1 3 ¹⁄₈ V 350/25-75K 14 2 ³⁄₄ 660 ball bearing 1 3 V 400/25-90G 15 ³⁄₄ 3 660 plain bore 1 3 ⁹⁄₁₆ V 400/25-75R 15 ³⁄₄ 3 660 roller bearing 1 3 V 400/25-90R 15 ³⁄₄ 3 660 roller bearing 1 3 ⁹⁄₁₆ V 400/30-90R 15 ³⁄₄ 3 660 roller bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆ V 402/25-90R 15 ³⁄₄ 3 ¹⁄₈ 1,045 roller bearing 1 3 ⁹⁄₁₆ V 402/30-90K 15 ³⁄₄ 3 ¹⁄₈ 1,045 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆ -
V – Swivel casters with plate
As standard, the wheels in the V series are available for the following rig series with top plate fitting:
L series: Pressed steel swivel rig with top plate fitting, medium duty design
A detailed description of the L rig is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]L-V 80R 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-V 100R 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ L-V 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ L-V 140R 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 L-V 162R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ L-V 182R 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₈ L-V 202R 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ L-V 200K 8 2 450 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ⁹⁄₁₆ L-V 205R 8 2 ⁹⁄₁₆ 495 roller bearing 9 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ³⁄₄ L-V 252R 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 2 ³⁄₄ L-V 252R-3 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 3 ¹⁄₁₆ L-V 256K 10 3 ³⁄₈ 770 ball bearing 11 ⁵⁄₈ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 2 ³⁄₄ L-V 282R 11 2 ³⁄₄ 850 roller bearing 12 ¹⁄₂ 6 ⁷⁄₈ x 6 ⁷⁄₈ 5 1/2 x 5 1/2 3 ¹⁄₁₆ -
V – Rigid casters
The V wheel series can be combined with the following rigid caster rigs:
B series: Pressed steel rigid rig with top plate fitting, medium duty design
BH series: Pressed steel rigid rig with top plate fitting, heavy duty designA comparison of the two rigid rig series is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]B-V 80R 3 ¹⁄₈ 1 110 roller bearing 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-V 100R 4 1 ³⁄₁₆ 155 roller bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-V 125R 4 ¹⁵⁄₁₆ 1 ¹⁵⁄₃₂ 220 roller bearing 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 B-V 140R 5 ¹⁄₂ 1 ¹⁵⁄₃₂ 255 roller bearing 6 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-V 162R 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 300 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-V 182R 7 ¹⁄₁₆ 2 375 roller bearing 8 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-V 202R 8 2 450 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-V 200K 8 2 450 ball bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-V 205R 8 2 ⁹⁄₁₆ 495 roller bearing 9 ⁷⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 BH-V 252R 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 B-V 252R 10 2 ³⁄₈ 650 roller bearing 11 ⁵⁄₈ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32 B-V 256K 10 3 ³⁄₈ 770 ball bearing 11 ⁵⁄₈ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32 B-V 282R 11 2 ³⁄₄ 850 roller bearing 12 ¹⁄₂ 8 ¹¹⁄₁₆ x 5 ¹⁄₈ 7 15/32 x 2 31/32