TPA – Stainless steel caster series
Stainless steel casters with thermoplastic rubber tread and polypropylene wheel center
The tread of the TPA series is made of high-quality thermoplastic rubber with a hardness of 85 Shore A. This non-marking material is cast onto the high-quality polypropylene wheel center and forms a strong chemical bond. The TPA series is characterised by very low rolling and swivel resistance. The casters in the series are also available in an electrically conductive version.
The TPA series is frequently used in the food industry or pharmaceuticals industry.
-
TPA – Stainless steel swivel casters with plate
The TPA series is available with the following stainless steel rigs with a plate fitting:
LPXA/LKPXA series: Stainless steel light duty swivel rig with top plate fitting
LEX series: Stainless steel swivel rig with top plate fitting
LKX series: Stainless steel heavy duty swivel rig with top plate fittingA detailed description of the rig series is available in the guide. Suitable brake systems for each base product are covered in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LPXA-TPA 50G 2 ³⁄₄ plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ To the product LPXA-TPA 50KFD 2 ³⁄₄ ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ To the product LPXA-TPA 75G 3 1 plain bore 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ To the product LPXA-TPA 75KFD 3 1 ball bearing (C) 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ To the product LKPXA-TPA 80G-12 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPXA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LEX-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LKPXA-TPA 80KFD-12 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPXA-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LEX-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LKPXA-TPA 101G-12 4 1 ¹⁄₄ plain bore 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPXA-TPA 101G 4 1 ¹⁄₄ plain bore 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LEX-TPA 102G 4 1 ¹⁄₄ 245 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LKPXA-TPA 101KFD-12 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPXA-TPA 101KFD 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LEX-TPA 102KFD 4 1 ¹⁄₄ 245 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆ To the product LKX-TPA 102KFD-14 4 1 ¹⁄₄ 245 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ³⁄₄ To the product LKPXA-TPA 126G-12 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPXA-TPA 126G-26 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 3x 2 1 ⁹⁄₁₆ To the product LKPXA-TPA 126G 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LEX-TPA 127G 5 1 ¹⁄₄ 275 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LKPXA-TPA 126KFD-12 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ To the product LKPXA-TPA 126KFD-26 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 3x 2 1 ⁹⁄₁₆ To the product LKPXA-TPA 126KFD 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ To the product LEX-TPA 127KFD 5 1 ¹⁄₄ 275 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ¹⁄₂ To the product LKX-TPA 127KFD-14 5 1 ¹⁄₄ 275 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ⁷⁄₈ To the product LEX-TPA 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LEX-TPA 160G-14 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ To the product LEX-TPA 160XR 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LEX-TPA 200G 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product LEX-TPA 200G-14 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ To the product LEX-TPA 200XR 8 1 ⁹⁄₁₆ 550 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 2 ¹⁄₈ To the product -
TPA – Stainless steel swivel casters with bolt hole
The TPA series is available with a bolt hole fitting in addition to other fitting types:
LRXA/LKRXA series: Stainless steel light duty swivel rig with bolt hole
LEXR series: Stainless steel swivel rig with bolt holeThe specific features of the rig are covered in our guide. Suitable brake system versions for each base product are provided in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LRXA-TPA 50G 2 ³⁄₄ plain bore 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ To the product LRXA-TPA 50KFD 2 ³⁄₄ ball bearing (C) 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ To the product LRXA-TPA 75G 3 1 plain bore 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ 1 ¹⁄₈ To the product LRXA-TPA 75KFD 3 1 ball bearing (C) 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ 1 ¹⁄₈ To the product LEXR-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LKRXA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRXA-TPA 80G-11 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LEXR-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LKRXA-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRXA-TPA 80KFD-11 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LEXR-TPA 102G 4 1 ¹⁄₄ 245 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LKRXA-TPA 101G 4 1 ¹⁄₄ plain bore 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRXA-TPA 101G-11 4 1 ¹⁄₄ plain bore 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LEXR-TPA 102KFD 4 1 ¹⁄₄ 245 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ To the product LKRXA-TPA 101KFD 4 1 ¹⁄₄ ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRXA-TPA 101KFD-11 4 1 ¹⁄₄ ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LKRXA-TPA 126G 5 1 ¹⁄₄ plain bore 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRXA-TPA 126G-11 5 1 ¹⁄₄ plain bore 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LEXR-TPA 127G 5 1 ¹⁄₄ 275 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LKRXA-TPA 126KFD 5 1 ¹⁄₄ ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ To the product LKRXA-TPA 126KFD-11 5 1 ¹⁄₄ ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ To the product LEXR-TPA 127KFD 5 1 ¹⁄₄ 275 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ To the product LEXR-TPA 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-TPA 160XR 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing 7 ¹¹⁄₁₆ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-TPA 200G 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product LEXR-TPA 200XR 8 1 ⁹⁄₁₆ 550 roller bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ To the product -
TPA – Stainless steel swivel casters with stem
Wheels in the TPA series can be combined with the following light duty stainless steel rig with a stem fitting:
LRXA/LKRXA series: Stainless steel light duty swivel rig with stem fitting
Refer to the guide for more information about the LRXA/LKRXA series. Suitable brake systems for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Stem Ø
[inch]Stem length
[inch]Offset
[inch]LKRXA-TPA 126G-ELS-ZAX51 5 1 ¹⁄₄ plain bore 6 ¹⁄₄ ¹¹⁄₁₆ 2 ⁷⁄₁₆ 1 ⁹⁄₁₆ To the product LKRXA-TPA 126G-ZAX51 5 1 ¹⁄₄ plain bore 6 ¹⁄₄ ¹¹⁄₁₆ 2 ⁷⁄₁₆ 1 ⁹⁄₁₆ To the product LKRXA-TPA 126KFD-ELS-ZAX51 5 1 ¹⁄₄ ball bearing (C) 6 ¹⁄₄ ¹¹⁄₁₆ 2 ⁷⁄₁₆ 1 ⁹⁄₁₆ To the product LKRXA-TPA 126KFD-ZAX51 5 1 ¹⁄₄ ball bearing (C) 6 ¹⁄₄ ¹¹⁄₁₆ 2 ⁷⁄₁₆ 1 ⁹⁄₁₆ To the product -
TPA – Stainless steel rigid casters
Blickle also provides casters with a rigid rig corresponding to the light duty swivel caster with a stainless steel rig:
BESX series: Stainless steel rigid rig with top plate fitting
BX series: Stainless steel rigid rig with top plate fitting
BPXA/BKPXA series: Stainless steel light duty rigid rig with top plate fitting
BRXA/BKRXA series: Stainless steel light duty rigid rig with bolt hole
BKSX series: Stainless steel rigid rig with top plate fitting, heavy duty designA detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]BPXA-TPA 50G 2 ³⁄₄ plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRXA-TPA 50G 2 ³⁄₄ plain bore 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPXA-TPA 50KFD 2 ³⁄₄ ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRXA-TPA 50KFD 2 ³⁄₄ ball bearing (C) 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPXA-TPA 75G 3 1 plain bore 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRXA-TPA 75G 3 1 plain bore 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ To the product BPXA-TPA 75KFD 3 1 ball bearing (C) 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 To the product BRXA-TPA 75KFD 3 1 ball bearing (C) 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ To the product BKPXA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRXA-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BX-TPA 80G 3 ¹⁄₈ 1 ¹⁄₄ 220 plain bore 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BKPXA-TPA 80G-12 3 ¹⁄₈ 1 ¹⁄₄ plain bore 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKPXA-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRXA-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BX-TPA 80KFD 3 ¹⁄₈ 1 ¹⁄₄ 220 ball bearing (C) 4 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BKPXA-TPA 80KFD-12 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKPXA-TPA 101G 4 1 ¹⁄₄ plain bore 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRXA-TPA 101G 4 1 ¹⁄₄ plain bore 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BX-TPA 102G 4 1 ¹⁄₄ 245 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BKPXA-TPA 101G-12 4 1 ¹⁄₄ plain bore 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKSX-TPA 102KFD-14 4 1 ¹⁄₄ 220 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 To the product BKPXA-TPA 101KFD 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRXA-TPA 101KFD 4 1 ¹⁄₄ ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BX-TPA 102KFD 4 1 ¹⁄₄ 245 ball bearing (C) 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BKPXA-TPA 101KFD-12 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BKPXA-TPA 126G-26 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 3x 2 To the product BKPXA-TPA 126G 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRXA-TPA 126G 5 1 ¹⁄₄ plain bore 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPXA-TPA 126G-12 5 1 ¹⁄₄ plain bore 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BX-TPA 127G 5 1 ¹⁄₄ 275 plain bore 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BKPXA-TPA 126KFD-26 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 3x 2 To the product BKPXA-TPA 126KFD 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 To the product BKRXA-TPA 126KFD 5 1 ¹⁄₄ ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ To the product BKPXA-TPA 126KFD-12 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 To the product BX-TPA 127KFD 5 1 ¹⁄₄ 275 ball bearing (C) 5 ⁷⁄₈ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 To the product BKSX-TPA 127KFD-14 5 1 ¹⁄₄ 275 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 To the product BX-TPA 160G 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BESX-TPA 160G-14 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 plain bore 7 ¹¹⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 To the product BX-TPA 160XR 6 ⁵⁄₁₆ 1 ⁹⁄₁₆ 440 roller bearing 7 ¹¹⁄₁₆ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BX-TPA 200G 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product BESX-TPA 200G-14 8 1 ⁹⁄₁₆ 550 plain bore 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 To the product BX-TPA 200XR 8 1 ⁹⁄₁₆ 550 roller bearing 9 ¹⁄₄ 5 ¹⁄₂ x 4 ⁵⁄₁₆ 4 1/8 x 2 31/32-3 5/32 To the product