Products

Pressed steel swivel caster, closed medium heavy duty rigs, top plate fitting and 'stop-fix' brake, Wheel with thermoplastic polyurethane tread, with heavy nylon wheel center, non-marking, non-staining

Bracket:

Made of heavy pressed steel, with four-point contact ball bearing in the swivel head for optimal absorption of vertical and horizontal forces, closed sealed swivel head. The use of hardened bearing seats in conjunction with the special Blickle dynamic riveting process provides increased protection against shocks and impact loads and results in smooth rolling characteristics, low abrasion and an increased service life. Bolted wheel axle. Zinc-plated, blue-passivated, Cr6-free.

Wheels:

Made of high-quality thermoplastic polyurethane, high operational comfort, low-noise operation, low rolling and swivelling resistance, good floor preservation, very high abrasion resistance, chemically bonded for an inseparable connection to the wheel center.

Tread/tyre:

Made of high-quality thermoplastic polyurethane.
Wheel center/rim:

Made of high-quality, impact-resistant nylon.
Wheel center color:

natural white
Variant:

non-marking, non-staining

Technical data

Display in:

Plate size	140 x 110
Bolt hole spacing	105 x 75-80
Bolt hole Ø	11
Wheel Ø	200 mm (D)
Wheel width	50 mm (T2)
Load capacity	750 kg
Total height	245 mm (H)
Offset swivel caster	63 mm
unit weight	3,9 kg
Temperature resistance to	-25 ° C
Temperature resistance to	70 ° C
tread and tire hardness	94° Shore A
Bearing type	Ball bearing

Bolt hole Ø	0,43
Plate size	5.51 x 4.33
Bolt hole spacing	4.13 x 2.95-3.15
Wheel Ø	7,9 inch (D)
Wheel width	1,969 inch (T2)
Load capacity	1650 lbs
Total height	9,6 inch (H)
Offset swivel caster	2,5 inch
unit weight	8,6 lbs
Temperature resistance to	-13 °F
Temperature resistance to	158 °F
tread and tire hardness	94° Shore A
Bearing type:	Ball bearing