GEV – Wheel and caster series
Heavy duty wheels and casters with elastic solid rubber tires and cast iron wheel center
The high quality elastic solid rubber tires in the GEV series are steel-wire reinforced and have a hardness of 65 Shore A. The wheel center with a grease nipple is made from rugged gray cast iron. In addition to a low level of rolling resistance, the wheels are quiet and provide good floor preservation. The wheels can also be used for higher speeds up to 16 km/h with a reduced load capacity.
The GEV wheel series is also available as a drive wheel (GEVN series)or as a hub fitting wheel (GEVA series) .
-
GEV – Wheels
The wheels in the GEV series come in sizes ranging between 10 and 24 ⁷⁄₁₆ inch in diameter as standard along with a ball bearing.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Load capacity
at 6 mph
[lbs]Load capacity
at 10 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]GEV 254/30K 10 8 ¹⁄₈ 2,800 1,930 1,765 ball bearing 1 ³⁄₁₆ 5 ¹⁄₈ To the product GEV 280/25K 11 3 1,920 1,280 970 ball bearing 1 3 ⁹⁄₁₆ To the product GEV 302/35K 12 3 ⁹⁄₁₆ 2,380 1,585 1,190 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆ To the product GEV 360/30K 14 ³⁄₁₆ 2 ³⁄₈ 1,985 1,325 990 ball bearing 1 ³⁄₁₆ 3 To the product GEV 362/35K 14 ³⁄₁₆ 3 2,515 1,675 1,255 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆ To the product GEV 400/30K 15 ³⁄₄ 3 2,645 1,765 1,325 ball bearing 1 ³⁄₁₆ 3 ⁹⁄₁₆ To the product GEV 405/45K 15 ¹⁵⁄₁₆ 8 ¹⁄₈ 3,970 2,645 1,985 ball bearing 1 ³⁄₄ 5 ¹⁄₈ To the product GEV 425/45K 16 ⁶⁄₈ 6 4,760 3,195 2,425 ball bearing 1 ³⁄₄ 6 To the product GEV 500/35K 19 ¹¹⁄₁₆ 3 ³⁄₈ 3,440 2,315 1,720 ball bearing 1 ³⁄₈ 3 ⁹⁄₁₆ To the product GEV 520/40K 20 ¹⁄₂ 4 4,035 2,700 2,030 ball bearing 1 ⁹⁄₁₆ 4 To the product GEV 550/60K 21 ⁵⁄₈ 6 ⁵⁄₁₆ 5,950 3,970 2,975 ball bearing 2 ³⁄₈ 6 ⁵⁄₁₆ To the product GEV 610/60K 24 6 5,950 3,970 2,975 ball bearing 2 ³⁄₈ 6 To the product GEV 620/65K 24 ⁷⁄₁₆ 8 10,010 6,845 6,250 ball bearing 2 ⁹⁄₁₆ 8 To the product -
GEV – Swivel casters with plate
Wheels in the GEV series are available with a welded steel rig:
LS series: Heavy duty welded steel swivel rig with top plate fitting, heavy duty swivel head
The brake system versions available for each base product are listed in the relevant section. A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LS-GEV 302K 12 3 ⁹⁄₁₆ 2,380 ball bearing 14 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 3 ³⁄₈ To the product LS-GEV 400K 15 ³⁄₄ 3 2,645 ball bearing 18 ¹⁄₂ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 4 To the product LS-GEV 520K 20 ¹⁄₂ 4 4,035 ball bearing 22 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 5 To the product LS-GEV 620K 24 ⁷⁄₁₆ 8 10,010 ball bearing 27 ¹⁵⁄₁₆ 10 ¹⁄₁₆ x 7 ⁷⁄₈ 8 1/4 x 6 5/16 5 ¹⁄₈ To the product -
GEV – Rigid casters
Blickle also provides a caster with a rigid rig to match the welded steel swivel caster:
BS series: Heavy duty welded steel rigid rig with top plate fitting, heavy duty design
A detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BS-GEV 302K 12 3 ⁹⁄₁₆ 2,380 ball bearing 14 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 To the product BS-GEV 400K 15 ³⁄₄ 3 2,645 ball bearing 18 ¹⁄₂ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 To the product BS-GEV 520K 20 ¹⁄₂ 4 4,035 ball bearing 22 ¹³⁄₁₆ 7 ⁷⁄₈ x 6 ⁵⁄₁₆ 6 5/16 x 4 3/4 To the product BS-GEV 620K 24 ⁷⁄₁₆ 8 10,010 ball bearing 27 ¹⁵⁄₁₆ 9 ¹³⁄₁₆ x 10 ⁵⁄₈ 8 9/32 x 6 5/16 To the product