ALSI – Wheel and caster series

Heat-resistant Blickle TempLine® Comfort wheels and casters with silicone rubber tread and aluminum wheel center

The heat-resistant wheels in the ALSI series use a die-cast aluminum wheel center with a vulcanised, highly heat-resistant silicone rubber with a hardness of 75 Shore A. The wheels provide a low level of starting and rolling resistance, excellent floor surface preservation and low-noise operation. The ALSI series is fitted with a ball bearing or plain bore as standard. They can be used at temperatures between -4 °F and +482 °F.

The heat-resistant and floor-preserving wheels of the ALSI series are frequently used in bakeries.

  • ALSI – Wheels

    The standard ALSI series includes wheels with a size of 4 inch. Customers can choose between a plain bore and a heat-resistant ball bearing. Blickle provides a PTFE-coated stainless steel axle tube for the plain bore version.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Axle bore Ø

    [inch]
    Hub
    length
    [inch]
    ALSI 100/12G 4 1 ⁹⁄₁₆ 220 plain bore ¹⁄₂ 1 ³⁄₄
    ALSI 100/8HKA 4 1 ⁹⁄₁₆ 220 ball bearing ⁵⁄₁₆ 1 ¹³⁄₁₆
    ALSI 100/15HK 4 1 ⁹⁄₁₆ 220 ball bearing ⁹⁄₁₆ 1 ³⁄₄
  • ALSI – Swivel casters with plate

    The wheels in the ALSI series are available as casters with a plate fitting in combination with the following rig series:

    LI series: Heat-resistant pressed steel swivel rig with top plate fitting, medium duty design

    A detailed description of the rig series is available in our guide.The brake system versions available for each base product are covered in greater detail in the relevant section.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    LI-ALSI 100G 4 1 ⁹⁄₁₆ 220 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
    LI-ALSI 100HKA 4 1 ⁹⁄₁₆ 220 ball bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8 1 ⁷⁄₁₆
  • ALSI – Swivel casters with bolt hole

    Blickle also provides a bolt hole fitting in addition to the plate fitting option. The following swivel rig is used for this purpose:

    LIR series: Heat-resistant pressed steel swivel rig with bolt hole, medium duty version

    A detailed description of the rig series and suitable brake systems is available in our guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate Ø

    [inch]
    Bolt
    hole Ø
    [inch]
    Offset

    [inch]
    LIR-ALSI 100G 4 1 ⁹⁄₁₆ 220 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆
    LIR-ALSI 100HKA 4 1 ⁹⁄₁₆ 220 ball bearing 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆
  • ALSI – Rigid casters

    Blickle uses the following rig series for the heat-resistant rigid casters in the ALSI series to match the swivel caster series:

    B series: Heat-resistant pressed steel rigid rig with top plate fitting, medium duty design

    A detailed description of the rig series is available in our guide.


    Wheel Ø

    [inch]
    Wheel
    width
    [inch]
    Load capacity
    at 2.5 mph
    [lbs]
    Bearing type


    Total height

    [inch]
    Plate
    dimensions
    [inch]
    Bolt hole
    spacing
    [inch]
    Bolt
    hole Ø
    [inch]
    B-ALSI 100G 4 1 ⁹⁄₁₆ 220 plain bore 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8
    B-ALSI 100HKA 4 1 ⁹⁄₁₆ 220 ball bearing 4 ¹⁵⁄₁₆ 3 ¹⁵⁄₁₆ x 3 ³⁄₈ 3 5/32 x 2 3/8